2023 Realistic JN0-363 Dumps Latest Juniper Practice Tests Dumps [Q113-Q133]

Rate this post

2023 Realistic JN0-363 Dumps Latest Juniper Practice Tests Dumps

JN0-363 Dumps PDF – JN0-363 Real Exam Questions Answers

The JN0-363 exam covers a wide range of topics, including network architecture, routing protocols, MPLS, BGP, OSPF, and VPN technologies. Candidates are expected to have a strong foundation in these areas and be able to apply their knowledge to real-world scenarios. JN0-363 exam is designed to test the candidate’s ability to deploy, configure, and troubleshoot Juniper Networks routers and switches in a service provider environment.

One of the unique features of the Juniper JN0-363 is that it emphasizes hands-on knowledge and experience required when working with Juniper Networks technology. This is reflected in the exam format, which includes practical, hands-on exams to simulate real-world scenarios. This hands-on approach to certification ensures that certified professionals are equipped to work in complex networking environments.

Q113. Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)

mstp-version

configuration-name

msti-revision

revision-level

Q114. Click the Exhibit.

Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface.
However, the LAG is not operational.
Which action will solve this problem?

Change one device to use LACP passive mode.

Change the system ID on one device.

Set the LACP system priority to a non-zero value on one device.

Set the LACP system priority to a non-zero value on both devices.

Q115. Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)

You should configure the max period for NSR precision timers.

You must configure GRES.

You must configure graceful restart.

You should configure commit synchronization.

Q116. Click the Exhibit.

You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?

Type external

Type internal

Export <policy name>

As -override

Q117. Click the Exhibit.

By default, at which router will the implicit null (Label3) action take place for LSP shown in the exhibit?

Q118. Which two statements are correct regarding TLVs in IS-IS? (Choose two.)

PDUs contain different TLVs.

TLVs contain different PDUs.

The TLV attributes are type, length, and value.

The TLV attributes are time. Length, and variable.

Q119. You have been asked to use a convention that allows for auto configuration of interface addresses.
You are not allowed to use DHCPv6. What do you do?

Use IPv4 with the autoconfig option under family inet.

Use IPv6 in the network to configure hosts.

Use a program (e.g. Vector-Wiz) to auto configure IP addresses.

Use an IPv6 static configuration.

Q120. You want to enable a routing platform with redundant REs to switch from a primary RE to a backup RE without alerting peer nodes. Which two technologies would you use to satisfy this requirement? (Choose two.)

GRES

VRRP

NSR

ISSU

Q121. Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?

Level 1 is enabled and Level 2 is disabled.

Level 1 is disabled and Level 2 is enabled.

Level 1 is enabled and Level 2 is enabled.

Level 1 is disabled and Level 2 is disabled.

Q122. You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses.
Which two tasks will accomplish your objective? (Choose two.)

Issue the sec protocols ospf area 0.0.0.0 interface ge-0/0/1.0 command.

Under the [edit routing-options] hierarchy, configure a 32-bit router ID.

issue the set protocols ospf3 area 0.0.0.0 interface ge-0/0/1.0 command.

Under the [edit routing-options] hierarchy, configure a 128-bit router ID.

Q123. Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present

The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present

The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present

The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present

Q124. Which two statements are true when configuring OSPF authentication? (Choose two.)

An OSPF link can support both simple password and MD5 authentication at the same time.

An MD5 password requires a key ID.

You can configure multiple MD5 passwords simultaneously on the same link.

If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.

Q125. Click the Exhibit.

Referring to the exhibit, which statement is correct about MVRP?

AS1’s VLAN ID list is missing an entry for VLAN 300.

ES2 is not interested in VLAN 300.

AS1 is not allowing ES2 access to VLAN 300.

ES1 is not advertising VLAN 300 to AS1.

Q126. Exhibit

Which two statements ate correct about the actions taken as the packet traverses the service provider MPLS network from Site 1 to Site 2 as shown in the exhibit? (Choose two.)

R2 will perform a lookup using the mpls.0 table.

R1 will perform a lookup using the lnet.3 table.

R1 will perform a lookup using the mpls.0 table.

R2 will perform a lookup using the inet.3 table.

Q127. Which two statements are true about VRRP? (Choose two.)

VRRP requires redundant REs on each member.

Interfaces within the same VRRP group do not have to be on the same subnet for each member.

Interfaces within the same VRRP group must be on the same subnet for each member.

VRRP does not require redundant REs on each member.

Q128. Which two IP addresses are considered Martian addresses? (Choose two.)

0.0.0.0/8

192.168.0.0/8

240.0.0.0/4

169.254.0.0/16

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr-routing.html

Q129. Click the Exhibit button.

Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?