[Jan 16, 2023] NS0-162 Dumps PDF and Test Engine Exam Questions – ActualPDF [Q21-Q45]

4/5 - (1 vote)

[Jan 16, 2023] NS0-162 Dumps PDF and Test Engine Exam Questions – ActualPDF

Verified NS0-162 exam dumps Q&As with Correct 90 Questions and Answers

NetApp NS0-162 Exam Topics:

Section	Objectives
Storage Platforms	-Describe knowledge of physical storage systems. -Describe software-defined on-premises or cloud storage systems. -Describe how to upgrade or scale ONTAP clusters.
SAN Solutions and Connectivity	-Describe how to use SAN solutions. -Demonstrate knowledge of how to troubleshoot SAN solutions.
NAS Solutions	-Describe how to use NAS solutions. -Demonstrate knowledge of how to troubleshoot NAS solutions.
Security	-Describe protocol security. -Describe security hardening. -Describe inflight or at rest encryption. -Identify SnapLock concepts.

NEW QUESTION 21
An administrator has added two new hosts in an FC connected virtual environment. However, no existing datastores or LUNs are visible to these two new hosts even after a rescan.
In this scenario, which two statements are correct? (Choose two.)

Verify that the host initiators are added to the correct igroups.

Verify that FC is licensed on the ONTAP cluster.

Verify that the LUNs are online and created with the correct OS type.

Verify that correct zoning is in place between the hosts and storage.

NEW QUESTION 22
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)

ADP

XCP

FLI

NKS

NEW QUESTION 23
Click the Exhibit button.
You have a new AFF A400 with a switched 10 GbE cluster interconnect.
Referring to the exhibit, which statement is true about utilizing free ports on slot 3 for the data connection?

Free ports can be used as a 10 GbE connection.

Slot 3 is used as the acceleration card and the cluster interconnect.

Ports in slot 3 can be used for 40/100 GbE data connections.

The ports in slot 3 cannot be used in any scenario.

NEW QUESTION 24
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?

SyncMlrror

SnapMirror Business Continuity (SM-BC)

SVM Disaster Recovery (SVM DR)

SnapMirror Synchronous (SMS)

NEW QUESTION 25
What is the default RAID policy for aggregates created with 10 TB disk drives?

RAID-TEC

RAID-DP

RAIDO

RAID4

NEW QUESTION 26
Click the Exhibit button.
You have a Linux host that is unable to access the namespace shown in the exhibit.
What is causing the problem?

Additional LIFs are required to support the Linux host.

Additional NVMe namespaces are required for the Linux host.

A subsystem containing the Linux host’s NQN must be provisioned.

The block size must be 8 KB to support the Linux host filesystem.

NEW QUESTION 27
You have a mix of FAS8200s and AFF A700s in your environment.
In this scenario, which two statements are true? (Choose two.)

Inline aggregate-level deduplication is enabled by default on FAS systems.

Inline data compaction is disabled by default on FAS systems.

Inline data compaction is disabled by default on AFF systems.

Inline aggregate-level deduplication is enabled by default on AFF systems.

NEW QUESTION 28
Exhibit.

You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?

02:a0:98:fl:2e:be

00:a0:98:fl:2e:b2

00:a0:98:fl:2e:b3

02:a0:98:fl:21:88

NEW QUESTION 29
You have a FAS8200 serving a dataset with a high volume of random reads. The dataset is highly optimized by deduplication and compression.
In this scenario, which compression setting provides both high performance and storage efficiency?

compression disabled

secondary compression

aggregate compression

adaptive compression

NEW QUESTION 30
Exhibit.

You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.
In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?

Set up new SM-S relationships from the AFF A220 to a new destination.

Set up new SM-S relationships from the FAS2720 to a new destination.

Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.

Modify the existing SVM-DR policy to use sync mode.

NEW QUESTION 31
You are asked to separate replication and data traffic into their own individual VLANs. You created two new VLANs and need to create logical interfaces (LIFs).
In this scenario, what must you do before creating the LIFs?

Create an interface group.

Create a firewall policy.

Create a network subnet.

Create a broadcast domain.

NEW QUESTION 32
Exhibit.

You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)

ONTAP reports that the volume Is using 10 GB of Its containing aggregate.

ONTAP reports the volume as 20% full.

ONTAP reports that the volume Is using 100 GB of its containing aggregate.

ONTAP reports the volume as 10% full.

NEW QUESTION 33
Which three protocols are supported by NetApp ONTAP Select? (Choose three.)

NFS

SCSI

NVMe

FCP

CIFS

NEW QUESTION 34
Click the Exhibit button.
A customer is complaining about performance and wants to improve the latency for vol01.
Referring to the exhibit, what is affecting the performance?

a disk

the network

the cluster

a QoS policy

NEW QUESTION 35
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?

an export policy named after the SVM with the suffix_nfs_exp1

a data volume named after the SVM with the suffix_nfs_vol1

a data aggregate named after the SVM with the suffix_nfs_aggr1

ai data LIF named after the SVM with the suffix_nfs_lif

NEW QUESTION 36
You are asked by your network engineering team to make sure that your NetApp cluster Is configured to run LACP on Its network ports. Which network component satisfies this request?

VLAN

Interface group

broadcast domain

failover group

NEW QUESTION 37
You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?

On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.

On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path

In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

NEW QUESTION 38
Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)

SMB

NVMe

ISCSI

NFS

NEW QUESTION 39
Click the Exhibit button.
The exhibit shows a Windows 2019 server with two FC HBAs using ALUA.
How many paths to LUN1 are active/optimized?

NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, what happens to the space in the volume if the Space Reserve option is set to “Enable”?

The LUN does not use any space from the volume since it is thin provisioned.

The volume grows by 100 GB to handle the LUN size of 100 GB.

The volume shows that 100 GB has been allocated to the LUN.

The volume shrinks by 100 GB to provide the LUN 100 GB of space to use.

NEW QUESTION 41
You have a 50 TO FlexGroup volume that is serving NFSv3 on a FAS8300 HA pair that Is running ONTAP 9.8 software of files. A Linux du command runs for days to count files.
In this scenario, which native ONTAP feature will report real-time file counts?

Quality of Service

Logical Space Reporting

volume autosize

File System Analytics

NEW QUESTION 42
You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task?

fractional reserve

Flash Pool

elastic sizing

Snapshot autodelete

NEW QUESTION 43
Exhibit.
Miss—————–
You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port eOc or eOd on either storage node.
In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports?

Create a DNS load balancing zone.

Split the broadcast domain.

Create an IPspace.

Change the LIF’s failover policy to sfo-partner-only

NEW QUESTION 44
You want to use external tools to monitor your ONTAP cluster’s performance metrics so you’re your operations team does not have to log in to the cluster.
Which three tools allow you to accomplish this task? (Choose three.)

Active IQ Unified Manager

ONTAP System Manager

Cloud Insights

OnCommand Insight

OnCommand Workflow Automation

NEW QUESTION 45
Exhibit.

You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.
Referring to the exhibit, what is the issue?