H35-211_V2.5 Exam Dumps Pass with Updated 2022 Certified Exam Questions [Q33-Q50]

5/5 - (1 vote)

H35-211_V2.5 Exam Dumps Pass with Updated 2022 Certified Exam Questions

H35-211_V2.5 Exam Questions – Real & Updated Questions PDF

NO.33 (Single)When you configure the HUAWEI NETWORK MANAGEMENT U2000 for FTTH IPTV service
access, which of the following templates needs to be configured ().

SNMP template

MGC template

IGMP template

Value-added business templates

NO.34 (Multi-select) esight is a network management software positioned in the enterprise network scenario, which
can view the details of onu devices, including the following information?

UNT port information

speed

Optical module temperature

The optical module transmits power

NO.35 (Multiple choice) When the OLT main control board CPU is detected to be continuously elevated, the
following possible causes are?

The user logged in illegally

Network loops

Cyber attacks

Rogue ONU

NO.36 (Radio) When the 0LT global or VLAN service template enables the PITP switch, the service port allows the
upstream packet to be carried, the Vendor tag switch, and the user to carry the vendor upstream packet In the
case of tarf information, the following statement regarding olts to PITP message processing strategies is
correct

OLT adds a local Vendor tap to the upstream PITP packet

OLT forwards the USER-side PITP message directly without any processing

OlT is left with the Vendor tag carried in the upstream PITP message, plus the local Vendor tag

OLT drops upstream PITP packets

NO.37 (Radio) When the invitation message sent by user A reaches user B after passing through server C, D, E, the
message received by user B is VIA. The server address of the field information record is in descending order.

C->D->E

E->C->D

E->D->C

C-E->D

NO.38 (Single-choice) HSI service uses VLAM tags to bind users precisely, if there are 5K FTTH hanging under the
LT Users, which VLAN switching scheme is recommended?

User VLAN->C’VLAN->S+CVLAN

S+C>S+C

c>S

C>S+C

NO.39 (Radio) Regarding multicast, the following description is incorrect

Add Lgmp user under BTV, and by default, multicast users can watch 8 programs.

The user-issued Report is captured in the single board logic and sent to the single board CPU

Device-based global configurations of Layer 2 groups refer to common parameters of protocols ( IGMP
Proxy, GMP Snoop) to all

When the igmp match mode disables, you need to configure the multicast program group

NO.40 (Radio) The following options, regarding the description of the H.248 connection model, are correct?

The connection model cannot be modified during a user session

When the session between the two users ends, the corresponding association is used

A media gateway that supports only point-to-point connections can allow three or more endpoints to
exist in the –association at the same time

When the user call is successful, the empty connection starts to be created

NO.41 The DBA scheduling of the GPON system is only for the upstream traffic, and the downstream traffic cannot
be scheduled.

True

False

NO.42 Type B protection provides redundant protection for both OLT PON ports and backbone fibers when OLT or
OLT PON If the port or trunk fiber fails, manually switch to another – luguang.

True

False

NO.43 (Radio) Which of the following options can improve the service experience of multicast users when switching
channels (switching time is shorter)

When adding a multicast program, the prejoin feature is disabled

Enables the Quick Leave feature when adding a multicast user

When you add a multicast user, enable the preview feature

Use group addresses with small values

NO.44 Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 100/8, voice gateway is 10. 1 1 1.
When configuring voIP service, the following command is incorrect

Using the command ip address media10 in voip mode. 1 1 10010 1 1 1 Configure the media IP

Use the reset coldstart command under Voice Interface to make the interface property configuration take
effect

Use the if-h248 attributei command to configure interface properties under the voice interface

Using the command ip address signaling10 in voip mode. 1 1 10010 1 1 1 Configure the signaling IP

NO.45 In esight’s OnT zero configuration deployment, do not provision OLT when incrementally configuring OLT.

True

False

NO.46 (Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the default
matching mode to match a 7-digit number beginning with 7727, then the following options are available?
The figure is

Local-bitmap add huawei normal 7727xxx/7726.

Local-digi tmap add huawei normal 772. /7727xxx

Local-di gi tmap add huawei normal 7727

Local-digitmap add huawei normal 7727xxx/7727

NO.47 The Class D multicast address range is from 224. 0 0 0 to 238. 255 255 255

True

False

NO.48 In Huawei’s u2000 management system, when adding network elements, you can only add — ones- when you
access the network element.

wrong

Right

NO.49 When the Type C dual home protection linkage uplink detection, if the OLT or OLT uplink fails, the Type C
dual home protection can be reversed to another OLT

True

False

NO.50 The scope of protection of the (multiple choice) GPON Type B dual attribution protection includes

Primary and standby OLTs

Primary and standby primary thousand fibers

OlT’s primary and standby PON should be ports

Primary and standby branch fibers

Loading …