Fortinet NSE7_OTS-6.4 Exam Questions (Updated 2023) 100% Real Question Answers [Q22-Q43]

Rate this post

Fortinet NSE7_OTS-6.4 Exam Questions (Updated 2023) 100% Real Question Answers

Pass Fortinet NSE7_OTS-6.4 Exam Quickly With ActualPDF

NEW QUESTION 22
Refer to the exhibit

In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?

PLCs use IEEE802.1Q protocol to communicate each other.

An administrator can create firewall policies in the switch to secure between PLCs.

This integration solution expands VLAN capabilities from Layer 2 to Layer 3.

There is no micro-segmentation in this topology.

NEW QUESTION 23
Refer to the exhibit.

Which statement about the interfaces shown in the exhibit is true?

port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.

The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.

port1-vlan10 and port2-vlan10 are part of the same broadcast domain

port1, port1-vlan10, and port1-vlan1 are in different broadcast domains

NEW QUESTION 24
Refer to the exhibit

In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?

PLCs use IEEE802.1Q protocol to communicate each other.

An administrator can create firewall policies in the switch to secure between PLCs.

This integration solution expands VLAN capabilities from Layer 2 to Layer 3.

There is no micro-segmentation in this topology.

NEW QUESTION 25
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)

Two-factor authentication on FortiAuthenticator

Role-based authentication on FortiNAC

FSSO authentication on FortiGate

Local authentication on FortiGate

NEW QUESTION 26
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?

FortiGate determined the user by passive authentication

The user was determined by Security Fabric

Two-factor authentication is not configured with RADIUS authentication method

FortiNAC determined the user by DHCP fingerprint method

NEW QUESTION 27
What can be assigned using network access control policies?

Layer 3 polling intervals

FortiNAC device polling methods

Logical networks

Profiling rules

NEW QUESTION 28
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)

Services defined in the firewall policy.

Source defined as internet services in the firewall policy

Lowest to highest policy ID number

Destination defined as internet services in the firewall policy

Highest to lowest priority defined in the firewall policy

NEW QUESTION 29
What can be assigned using network access control policies?

Layer 3 polling intervals

FortiNAC device polling methods

Logical networks

Profiling rules

NEW QUESTION 30
Which three common breach points can be found in a typical OT environment? (Choose three.)

Global hat

Hard hat

VLAN exploits

Black hat

RTU exploits

NEW QUESTION 31
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?

It uses OSI Layer 2 and the primary device sends data based on request from secondary device.

It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.

It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.

It uses OSI Layer 2 and the secondary device sends data based on request from primary device.

NEW QUESTION 32
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)

Services defined in the firewall policy.

Source defined as internet services in the firewall policy

Lowest to highest policy ID number

Destination defined as internet services in the firewall policy

Highest to lowest priority defined in the firewall policy

NEW QUESTION 33
Refer to the exhibit and analyze the output.

Which statement about the output is true?

This is a sample of a FortiAnalyzer system interface event log.

This is a sample of an SNMP temperature control event log.

This is a sample of a PAM event type.

This is a sample of FortiGate interface statistics.

NEW QUESTION 34
An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.
Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?

FortiSIEM and FortiManager

FortiSandbox and FortiSIEM

FortiSOAR and FortiSIEM

A syslog server and FortiSIEM

NEW QUESTION 35
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?

Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.

Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.

Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.

Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.

NEW QUESTION 36
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?

Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.

Create a notification policy and define a script/remediation on FortiSIEM.

Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.

Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.

NEW QUESTION 37
Refer to the exhibit.

Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)

FortiGate for SD-WAN

FortiGate for application control and IPS

FortiNAC for network access control

FortiSIEM for security incident and event management

FortiEDR for endpoint detection

NEW QUESTION 38
When you create a user or host profile, which three criteria can you use? (Choose three.)

Host or user group memberships

Administrative group membership

An existing access control policy

Location

Host or user attributes

NEW QUESTION 39
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?

The user was determined by Security Fabric

FortiGate determined the user by passive authentication

FortiNAC determined the user by DHCP fingerprint method

Two-factor authentication is not configured with RADIUS authentication method

NEW QUESTION 40
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)? (Choose three.)

FortiNAC

FortiManager

FortiAnalyzer

FortiSIEM

FortiGate

NEW QUESTION 41
Refer to the exhibit.

An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?

A FortiSIEM CMDB report

A FortiAnalyzer device report

A FortiSIEM incident report

A FortiSIEM analytics report

NEW QUESTION 42
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?

The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.

The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.

PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.

In order to communicate, PLC1 must be in the same VLAN as PLC2.

NEW QUESTION 43
Refer to the exhibit.

Given the configurations on the FortiGate, which statement is true?

FortiGate is configured with forward-domains to reduce unnecessary traffic.

FortiGate is configured with forward-domains to forward only domain controller traffic.

FortiGate is configured with forward-domains to forward only company domain website traffic.

FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.

Real Fortinet NSE7_OTS-6.4 Exam Questions [Updated 2023]: https://www.actualpdf.com/NSE7_OTS-6.4_exam-dumps.html

Leave a Reply Cancel reply