[Q36-Q54] Get Prepared for Your DES-1221 Exam With Actual EMC Study Guide!

Rate this post

Get Prepared for Your DES-1221 Exam With Actual EMC Study Guide!

Pass Your Next DES-1221 Certification Exam Easily & Hassle Free

Understanding functional and technical aspects of Specialist – Implementation Engineer, PowerStore Solutions Version 1.0 PowerStore Software and Hardware upgrades (7%)

The following will be discussed in DELL DES-1221 exam dumps:

Describe and perform PowerStore software upgrade
Add drives to a PowerStore appliance
Add an appliance into a cluster
Add an expansion shelve to a PowerStore appliance

Q36. An administrator received a request to provision a new volume. Use the simulator to provision a volume of
50 GB with a performance policy of high for their host named “ApplicationTeam”. When you have finished using the simulator, click Next.

check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.

Q37. A protection policy with snapshot and replication rules is applied to a file system. What is the result?

Applying the protection policy to the file system fails

Replication rules get ignored and only snapshot rules get applied

Both replication and snapshot rules get applied

Snapshot rules get ignored and only replication rules get applied

Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-protect-data/data-protection-in- powerstore?guid=guid-19c6d0e1-fa20-4fb5-9983-61c17abaf21b&lang=en-us

Q38. What is the logical block size when creating and formatting volumes on PowerStore for Windows hosts?

512 bytes

520 bytes

4096 bytes

64 kilobytes

Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-hcg/disk-formatting?guid=guid-
27740e37-8432-4241-a3d7-bf18843a94ce&lang=en-us

Q39. 1.a.1 What is the maximum number of appliances that can be connected to form a cluster?

1 in a PowerStore T cluster, 4 in a PowerStore X cluster

1 in a PowerStore T cluster, 1 in a PowerStore X cluster

4 in a PowerStore T cluster, 4 in a PowerStore X cluster

4 in a PowerStore T cluster, 1 in a PowerStore X cluster

Q40. What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

Whether the Cluster is offline Node failure status
I/O utilization

Whether the appliance is online Appliance failure status
Cluster utilization

Whether the Node is offline Appliance failure status Node utilization

Whether the appliance is offline Appliance failure status Capacity utilization

Q41. An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?

UDS

SMB

LDAP

NTP

Explanation/Reference: https://www.dell.com/support/article/en-pk/sln317202/powerstore-alerts-smb-server-alerts?
lang=en

Q42. What describes the process used in the Import External Storage migration architecture?

Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage

Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage

Q43. An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?

Host is removed from the VNX2 Storage Group

Imported LUN is removed from the VNX2 Storage Group

Storage Group containing the imported LUN is deleted

Imported LUN is deleted from the VNX2

Explanation/Reference: https://laptrinhx.com/what-is-dell-emc-powerstore-part-7-importing-external-storage-
146661351/

Q44. Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?

Two 10 GigE

Two 25 GbE

Two 100 GigE

Four 1 GbE

Q45. 1.a.1 What is the maximum number of appliances that can be connected to form a cluster?

1 in a PowerStore T cluster, 4 in a PowerStore X cluster

1 in a PowerStore T cluster, 1 in a PowerStore X cluster

4 in a PowerStore T cluster, 4 in a PowerStore X cluster

4 in a PowerStore T cluster, 1 in a PowerStore X cluster

Q46. When a Volume is selected for the intercluster migration, what other data services associated with the volume will also be moved with it?

Thin Clones and snapshots

Thin Clones and File systems

Replications and Volume Groups

NAS Servers and File.systems

Q47. What describes the remote replication Failover operation?

It is run automatically by the replication destination system in the event of a source system outage

It is run from the replication destination system by the administrator in the event of a source system outage

It is run automatically by the replication source system in the event of a source system outage

It is run from the replication source system by the administrator in the event of an outage on the system

Q48. What does the remote replication Failover operation do?

Fully synchronizes the source and destination data states and reverses the replication direction

Fully synchronizes the source and destination data states and stops the current replication session

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

Q49. What are the IP requirements for ICW on PowerStore X and PowerStore T models?

PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses

PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses

PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses

PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses

Q50. What does the remote replication Failover operation do?

Fully synchronizes the source and destination data states and reverses the replication direction

Fully synchronizes the source and destination data states and stops the current replication session

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-25-dae/pwrstr-protect-data/replication?guid=guid-7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-us

Q51. What is the total number of NVRAM devices used in PowerStore 3000?

Up to 6

Up to 21

Q52. What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?

Select the folder location on the host for the program installation

Select the RSA key for configuring the control path HTTPS certificate

Configure the network port and interface for the host data path

Configure the network port and interface for the management control path

Q53. Correctly arrange the sequence of the write operation in PowerStore.