[May 27, 2022] ActualPDF NS0-593 Exam Practice Test Questions (Updated 60 Questions) [Q15-Q38]

Rate this post

[May 27, 2022] ActualPDF NS0-593 Exam Practice Test Questions (Updated 60 Questions)

Pass Network Appliance NS0-593 Exam Info and Free Practice Test

Network Appliance NS0-593 Exam Syllabus Topics:

Topic	Details
Topic 1	Software-defined ONTAP Solutions Describe the structure of ONTAP OS
Topic 2	Demonstrate knowledge of S3 server configurations Demonstrate knowledge of data replication issues
Topic 3	Demonstrate knowledge of how to handle panic events Describe the tools available for support or troubleshooting
Topic 4	Describe ONTAP performance concepts Describe MetroCluster configurations
Topic 5	Demonstrate knowledge of troubleshooting ONTAP performance Demonstrate knowledge of ONTAP cluster administration

Q15. You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp
CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that
the cluster network has degraded. After troubleshooting, you determine that the errors are being generated
fromNode 2, interface e0b.
In this scenario, what should you do first to solve this problem?

Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.

Replace the motherboard on Node 2.

Replace both NetApp CN1610 switches.

Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.

Q16. A storage administrator reports that a monitoring toot is reporting that the storage controller reads between
90% to 93% CPU use. You run the sysstat -m command against thenode in question.

Referring to the exhibit, which statement is correct?

The customer should be advised to exclude certain workflows to reduce use.

High network exempt use could be a problem.

You should immediately investigate further bygathering perfstat data and opening a support case.

The CPU Is not a first-order monitoring metric for ONTAP.

Q17. After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?

Delete unneeded files from the directory.

Move the volume to a different aggregate.

Increase the maximum numberof files for the volume.

Increase the maximum directory size for the volume.

Q18. After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report “offline”.
What would you examine first to troubleshoot the issue?

vserver fcp wwpn-alias show command output

system node hardware unified-connect show command output

storage port show command output

vserver fcp interface show command output

Q19. Your customer has mounted an NFS SVM from a Linux client unci performance is very poor. The customer is
certain that they have jumbo frames enabled. They have verified an MTU of 9000 on both the Linux client and
the broadcast domain on the NetApp ONTAP 9.8 cluster.

Referring to the exhibit, which ONTAP command will help isolate a possible MTU mismatch?

Q20. You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the “Urge” column has non-zero values.
In this scenario, which statement is true?

The aggregate is completely full.

The constituent volumes are out ofInodes.

The data placement is uneven.

The constituent volumes are completely full.

Q21. You receive the “Unable to connect to the management gateway server”error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

Q22. Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS)
capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is
only responding with one data LIF. DDNS is enabled on the domain controllers.

Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose
two.)

Disable the -vserver-fqdn parameter for the SVM DDNS services.

Remove the NFS protocol from the cifs_01 data LIF.

Enable the -use-secure parameter for the SVM DDNS services.

Enable the -is-enabledparameter for the SVM DDNS services

Q23. The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02.
Node-02 panics showing the string below.
PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess
fnmbx_instanceWorker on release 9.5P8 (C)
What has happened in this situation?

While in maintenance mode, the sldiag device show command was executed.

While in maintenance mode, the fcadmin device_map command was executed.

While in maintenance mode, the HA_config show command was executed.

While in maintenance mode, the mailbox destroy local command was executed.

Q24. You recently discovered the error message shown below in your ONTAP logs.

What should be your first action to correct this Issue?

Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume.

Determine the root cause behind the inconsistency before attempting any recovery procedure.

Use the storage takeover command on the storage controller that contains my_data_vol.

Use the wafliron command against my_data_vol to solve the inconsistency on the volume.

Q25. Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While
investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.
In this scenario, what Is the cause of this problem?

Newer Snapshot copies than the common snapshot that was chosen for resync were removed
automatically at the destination.

The autodelete option removed Snapshot copies before the resync.

Snapshot copies were manually removed from the destination after the resync.

NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.

Q26. A user mentions that their home drive, that Is an export within a volume, is no longer allowing them to save
files. The drive reports that it Is full, even though It shows that minimal data is written to it.
Which statement would explain this behavior?

The mount is stale and uses a cached version of the volume.

Other users wrote to this user’s home drive.

Other files within the volume are also owned by the user, exceeding the user quota.

The client system needs to remount the export to show the proper space.

Q27. A system panic due to an “L2 watchdog timeout hard reset” error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?

before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A

BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11

before Reset BBSP:C=00 L=00 FIFO:

ONTAP Shutdown BBSP:C=00 L=2F FIFO:

Q28. Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC
protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports
that the server’s FC HBA port Is online, but the LUN does not show up.

Referring to the exhibit, what is the reason for this problem?

The FC service has not been configured on the SVM.

The zoning on the FC switches Is Incorrect.

The LUN Is not mapped to the correct SCSI ID.

The esxserver igroup contains incorrect IQNs.

Q29. You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet
trace.
In this scenario, after you generate the packet trace, where do you find the trace file?

/packet_traces of the node hosting the LIF

/etc/log/packet_traces of the node hosting the LIF

/etc/log/mlog/packet._traces Of all nodes

/vol0/paclcet_traces of the CIFS SVM

Q30. You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail
over across subnets.
How would youaccomplish this task?

Configure an equal number of UFs on each subnet.

Configure VIP LIFs using OSPF.

Configure VIP LIFs using BGP.

Configure a I IF failover policy for each subnet inside a single broadcast domain.

Q31. You receive the panic message shown in the exhibit.

In this scenario, which component should you troubleshoot first?

the PCI card in slot 3

the MetroCluster FC-Vl card in slot 6

the memory module in slot 1

the CPU

Q32. Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)

Having an Essentials package enables you to convert to another licensing option.

Capacity-based license packages support only single-node configurations.

BYOL licenses are purchased directly from NetApp.

AWS Marketplace contracts cannot be mixed with BYOL.

Q33. Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP
9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are
placed into the FlexGroup volume.
In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)

-v3-64bit-identifiers

-v4-fsid-change

-v3-fsid-change

-v4-64bit-idantifiers

Q34. A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.

What is the cause of the customer’s problem?

The cable is plugged in upside down.

The incorrect cable is used.

The ports are configured for 4x10Gbit instead of 40Gbit.

The port has an incorrect SFP inserted.

Q35. You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?

Change the vCenter password.

Change the IP address of the ONTAP Select Deploy VM.

Change the gateway address of the ONTAP Select Deploy VM.

Change the IP address of the vCenter server.

Q36. Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)

-mail-hosts

-transport

-proxy-url

-to

Q37. A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?

The customer did not configure name services on the SVM.

The clients must be restarted to start using NFSv4.

The export policy is not configured properly.

The ID mapping domains do not match between the client and server.

Q38. When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type
consistency points (CPs) found occurring onthe loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?

During B2B processing, clients will be unable to write data.

Data aggregates will not be affected by B2B processing on another aggregate.

During B2B processing, all I/O to the node is stopped.

During B2B processing, clients will be unable to read data.