[Q13-Q32] Pass Fortinet NSE6_SDW_AD-7.6 Exam in First Attempt Guaranteed [Aug-2026]

5/5 - (2 votes)

Pass Fortinet NSE6_SDW_AD-7.6 Exam in First Attempt Guaranteed [Aug-2026]

Exam Sure Pass Fortinet Certification with NSE6_SDW_AD-7.6 exam questions

Fortinet NSE6_SDW_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	SD-WAN troubleshooting: This domain explains how to diagnose and resolve issues related to SD-WAN operation. It includes troubleshooting SD-WAN rules, session behavior, routing problems, and ADVPN connectivity to maintain reliable network performance.
Topic 2	Centralized management: This domain focuses on deploying and managing SD-WAN using FortiManager for centralized control. It includes implementing branch configuration deployment and using SD-WAN Manager with overlay orchestration to simplify large-scale network management.
Topic 3	SD-WAN setup: This domain covers how to deploy an enterprise SD-WAN environment by designing SD-WAN members and zones and configuring them for efficient traffic management. It also focuses on implementing Performance SLAs to monitor link quality and ensure applications use the best available path.
Topic 4	Advanced IPsec: This section covers the deployment of advanced IPsec configurations within SD-WAN environments. It includes implementing hub-and-spoke IPsec topologies, configuring ADVPN, and supporting multihub, multiregion, and large-scale secure SD-WAN deployments.
Topic 5	Rules and routing: This section explains how to design and apply SD-WAN rules to control traffic steering across multiple WAN links. It also includes configuring SD-WAN routing to ensure proper path selection and connectivity between networks.

QUESTION 13
Which statement about SD-WAN zones is true?

You can configure up to 32 SD-WAN zones per VDOM.

You cannot use an SD-WAN zone in static route definitions.

An SD-WAN zone can contain only one type of interface.

An SD-WAN zone can contain between 0 and 512 members.

QUESTION 14
As an MSSP administrator, you are asked to configure ADVPN on an existing SD-WAN topology.
FortiManager manages the customer devices in a dedicated ADOM. The previous administrator used the SD-WAN overlay topology.
Which two statements apply to this scenario? (Choose two.)

You can activate auto-discovery VPN in the SD-WAN overlay template only if it is a single hub topology.

When auto-discovery VPN is enabled, FortiManager updates the IPsec and BGP templates in the hub.

After you enable auto-discovery VPN in the overlay template, you must select between ADVPN
2.0 and ADVPN 1.0.

You can activate auto-discovery VPN in the SD-WAN overlay template for any type of topology, including a primary-primary dual-hub topology.

QUESTION 15
Within the context of SD-WAN, what does SIA correspond to?

Remote Breakout

Local Breakout

Software Internet Access

Secure Internet Authorization

QUESTION 16
(Refer to the exhibits.

You collected the output shown in the exhibits and want to know which interface HTTP traffic will flow through from the user device 10.0.1.101 to the corporate web server 10.0.0.126. All SD-WAN links are stable.
Which interface will FortiGate use to steer the traffic? Choose one answer.)

Only HUB1-VPN3

Only HUB1-VPN2

Either HUB1-VPN2 or HUB1-VPN3

Either HUB1-VPN1, HUB1-VPN2, or HUB1-VPN3

QUESTION 17
Exhibit.

For your ZTP deployment, you review the CSV file shown in exhibit and note that it is missing important information. Which two elements must you change before you can import it into FortiManager? (Choose two.)

You must associate a device blueprint with each device

You must define a name for each device

You must define a value for each device and each metadata variable that defines an IP address.

You must define a value for each device and each user-defined metadata variable.

QUESTION 18
Within the context of SD-WAN, what does SIA correspond to?

Remote Breakout

Local Breakout

Software Internet Access

Secure Internet Authorization

QUESTION 19
Refer to the exhibits. An administrator is testing application steering in SD-WAN. Before generating test traffic, the administrator collected the information shown in the first exhibit. After generating GoToMeeting test traffic, the administrator examined the corresponding traffic log on FortiAnalyzer, which is shown in the second exhibit.
The administrator noticed that the traffic matched the implicit SD-WAN rule, but they expected the traffic to match rule ID 1.
Which two reasons explain why some log messages show that the traffic matched the implicit SD- WAN rule? (Choose two.)

Full SSL inspection is not enabled on the matching firewall policy.

The session 3-tuple did not match any of the existing entries in the ISDB application cache.

FortiGate could not refresh the routing information on the session after the application was detected.

No configured SD-WAN rule matches the traffic related to the collaboration application GoToMeeting

QUESTION 20
Refer to the exhibit, which shows output of the command diagnose sys sdwan health-check status collected on a FortiGate device.

Which two statements are correct about the health check status on this FortiGate device?
(Choose two.)

The interface T_INET_0 missed three SLA targets.

The interface T_INET_1 missed one SLA target.

There is no SLA criteria configured for the health-check Level3_DNS.

The health-check VPN_PING orders the members according to the measured jitter.

QUESTION 21
What are three key routing principles of SD-WAN? (Choose three.)

Internet Service Database (ISDB) routes have precedence over SD-WAN rules.

Routes to directly connected subnets have precedence over SD-WAN rules.

SD-WAN rules are skipped if the best route to the destination is a static route

SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.

SD-WAN members are skipped if they do not have a valid route to the destination.

QUESTION 22
(Refer to the exhibits.

Two SD-WAN event logs, the member status, the SD-WAN rule configuration, and the health-check configuration for a FortiGate device are shown.
Immediately after the log messages are displayed, how will the FortiGate steer the traffic based on the information shown in the exhibits? Choose one answer.)

FortiGate skips SD-WAN rule ID 1.

FortiGate uses port2 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port1 to steer the traffic for SD-WAN rule ID 1.

FortiGate uses port1 or port2 to steer the traffic for SD-WAN rule ID 1.

QUESTION 23
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)

Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.

The session information output displays no SD-WAN-specific details.

Traffic does not match any of the entries in the policy route table.

All SD-WAN rules have the default and gateway setting enabled.

QUESTION 24
You want FortiGate to use SD-WAN rules to steer local-out traffic.
Which two constraints should you consider? (Choose two.)

By default, FortiGate uses SD-WAN rules only for local-out traffic that corresponds to pingand traceroute.

By default, local-out traffic does not use SD-WAN.

You can steer local-out traffic only with SD-WAN rules that use the manual strategy.

You must configure each local-out feature individually to use SD-WAN.

QUESTION 25
You have a FortiGate configuration with three user-defined SD-WAN zones and two members in each of these zones. One SD-WAN member is no longer in use in health-check and SD-WAN rules. You want to delete it.
What happens if you delete the SD-WAN member from the FortiGate GUI?

FodiGate accepts the deletion and removes routes as required.

FortiGate displays an error message. You must use the CLI to delete an SD-WAN member.

FortiGate displays an error message. SD-WAN zones must contain at least two members

FortiGate accepts the deletion and places the member in the default SD-WAN zone.

QUESTION 26
Refer to the exhibits.

The exhibits show two IPsec templates to define Branch IPsec 1 and Branch_IPsec_2. Each template defines a VPN tunnel. The error message that FortiManager displayed when the administrator tried to assign the second template to the FortiGate device is also shown.
Which statement best describes the cause of the issue?

You can assign only one template with a tunnel type of static to each FortiGate device.

You can assign only one IPsec template to each FortiGate device.

You should review the branch1_fgt configuration for configured tunnels in the rootVDOM.

You should use the same outgoing interface of both templates.

QUESTION 27
Refer to the exhibit, which shows the SD-WAN rule status and configuration.

Based on the exhibit, which change in the measured latency will first make HUB1-VPN3 the new preferred member?

When HUB1-VPN3 has a lower latency than HUB1-VPN1 and HUB1-VPN2

When HUB1-VPN3 has a latency of 80 ms

When HUB1-VPN3 has a latency of 90 ms

When HUB1-VPN1 has a latency of 200 ms

QUESTION 28
Refer to the exhibit. You want to configure SD-WAN on a network as shown in the exhibit. The network contains many FortiGate devices. Some are used as NGFW, and some are installed with extensions such as FortiSwitch, FortiAP or FortiExtender. What should you consider when planning your deployment?

You can build an SD-WAN topology that includes all devices. The hubs can be FortiGate devices with FortiExtender.

You can build an SD-WAN topology that includes all devices. The hubs must be devices without extensions.

You should exclude the FortiGate devices with FortiLink connection from the SD-WAN topology.

You should build multiple SD-WAN topologies. Each topology should contain only one type of extension.

QUESTION 29
Refer to the exhibit.

How does FortiGate handle the traffic with the source IP 10.0.1.130 and the destination IP 128.66.0 125?

FortiGate drops the traffic flow.

FortiGate routes the traffic flow according to the forwarding information base (FIB).

FortiGate load balances the traffic flow through port7 and port8.

FortiGate steers the traffic flow through port7.

QUESTION 30
(Refer to the exhibits.

The SD-WAN overlay template advanced settings and the underlay and network advertisement settings are shown. These are the configurations for the secondary hub of a dual-hub SD-WAN topology created with the FortiManager SD-WAN overlay orchestrator.
Which two conclusions can you draw from the information shown in the exhibits? Choose two answers.)

FortiManager will define port2 as a BGP neighbor.

FortiManager will create an overlay tunnel on the port2 interface.

FortiManager will create an overlay tunnel on the port1 interface.

FortiManager will define port5 as a BGP neighbor.

QUESTION 31
An SD-WAN member is no longer used to steer SD-WAN traffic. The administrator updated the SD-WAN configuration and deleted the unused member. After the configuration update, users report that some destinations are unreachable. You confirm that the affected flow does not match an SD-WAN rule.
What could be a possible cause of the traffic interruption?

FortiGate, with SD-WAN enabled, cannot route traffic through interfaces that are not SD-WAN members.

FortiGate can remove some static routes associated with an interface when the member is removed from SD-WAN.

FortiGate removes the layer 3 settings for interfaces that are removed from the SD-WAN configuration.

FortiGate administratively brings down interfaces when they are removed from the SD-WAN configuration.

QUESTION 32
Which two statements correctly describe what happens when traffic matches the implicit SD-WAN rule? (Choose two.)

The session information output displays no SD-WAN service id.

Traffic is load balanced using the algorithm set for the v4-ecmp-modesetting.

The traffic is distributed, regardless of weight, through all available static routes.

Traffic does not match any of the entries in the policy route table.

FortiGate flags the session with may_dirtyand vwl_default.

Real Fortinet NSE6_SDW_AD-7.6 Exam Questions Study Guide: https://www.actualpdf.com/NSE6_SDW_AD-7.6_exam-dumps.html

Fortinet NSE6_SDW_AD-7.6 Exam Syllabus Topics:

Leave a Reply Cancel reply