Updated Nov-2025 HPE7-A01 Free Exam Files Downloaded Instantly [Q51-Q74]

4/5 - (1 vote)

Updated Nov-2025 HPE7-A01 Free Exam Files Downloaded Instantly

Practice Exams and Training Solutions for Certifications

Achieving the Aruba Certified Campus Access Professional certification is a significant milestone for IT professionals. It demonstrates their expertise in working with Aruba’s products and technologies and can help them stand out in a crowded job market. It can also open up new career opportunities, as many organizations are looking for IT professionals who are certified in working with Aruba’s networking solutions.

QUESTION 51
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?

“The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients

When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz

The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.

QUESTION 52
Match each PoE power class to Its corresponding 802.3 standard. (Options may he used more than once or not at all)

QUESTION 53
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What statements are correct regarding the ERSPAN session that needs to be established on an AOS-CX switch’? (Select two )

On the source AOS-CX switch, the destination specified is the switch to which the administrator’s desktop is connected

The encapsulation protocol used is GRE.

The encapsulation protocol used is VXLAN.

The encapsulation protocol is UDP.

On the source AOS-CX switch, the destination specified is the administrators desktop

QUESTION 54
Match the topics with the underlying technologies (Options may be used more than once or not at all.)

QUESTION 55
Using Aruba best practices what should be enabled for visitor networks where encryption is needed but authentication is not required?

Wi-Fi Protected Access 3 Enterprise

Opportunistic Wireless Encryption

Wired Equivalent Privacy

Open Network Access

QUESTION 56
A customer is using stacked Aruba CX 6200 and CX 6300 switches for access and a VSX pair of Aruba CX
8325 as a collapsed core 802 1X is implemented for authentication. Due to the lack of cabling, some unmanaged switches are still in use Sometimes devices behind these switches cause network outages The switch should send a warning to the helpdesk when the problem occurs You have been asked to implement an effective solution to the problem What is the solution for this?

Configure spanning tree on the Aruba CX 8325 switches Set the trap-option

Configure loop protection on all edge ports of the Aruba CX 6200 and CX 6300 switches No trap option is needed

Configure loop protection on all edge ports of the Aruba CX 6200 and CX 6300 switches Set up the trap-option

Configure spanning tree on the Aruba CX 6200 and CX 6300 switches No trap option is needed

QUESTION 57
your customer has asked you to assign a switch management role for a new user The customer requires the user role to View switch configuration information and have access to the PUT and POST meth0ds for REST API.
Which default AOS-CX user role meets these requirements?

administrators

auditors

sysops

helpdesk

QUESTION 58
A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again.
What is the best way to avoid having this traffic dropped given the topology below?

Configure the linkup delay timer to 240 seconds to double the amount of lime for the initial phase to sync

Configure the linkup delay timer to exclude LAGS 101 and 102, which will allow time for routing adjacencies to form and to learn upstream routes

Configure the linkup delay timer to include LAGs 101 and 102, which will allow time for routing adjacencies lo form and to learn upstream routes

Configure the linkup delay timer to 120 seconds, which will allow the right amount of time for the initial phase to sync

QUESTION 59
Refer to the exhibit.

With Core-1. what is the default value for config-revision?

1-0

0. 0

QUESTION 60
What is used to retrieve data stored in a Management Information Base (MIB)?

SNMPv3

DSCP

TLV

CDP

QUESTION 61
What does the 802.3bz standard describe?

2.5Gb and 5Gb Ethernet ports

60 W and 90W PoE

AP directed roaming between APs

60 GHz P2P Wi-Fi

QUESTION 62
AppRF 2.0 allows you to:

configure ACL and bandwidth control for applications

classify web content based on reputation

customize application signatures

monitor applications and radio frequencies

QUESTION 63
What are two advantages of splitting a larger OSPF area into a number of smaller areas? (Select two)

It extends the LSDB

It increases stability

it simplifies the configuration.

It reduces processing overhead.

It reduces the total number of LSAs

QUESTION 64
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the “show arp” command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

QUESTION 65
What protocol should be configured to ensure redundancy for access switches in an Aruba-based network that lacks physical stacking capabilities?

OSPF

VRRP

MSTP

LACP

QUESTION 66
Refer to Exhibit:

With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?

Spanning-tree bpdu-guard setting

Spanning-tree instance vlan mapppjng

spanning-tree Cist mapping

Spanning-tree root-guard setting

The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500.
These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
A) Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
C) Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
D) Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.

QUESTION 67
Which statements regarding 0SPFv2 route redistribution are true for Aruba OS CX switches? (Select two.)

The “redistribute connected” command will redistribute all connected routes for the switch including local loopback addresses

The “redistribute ospf” command will redistribute routes from all OSPF V2 and V3 processes

The “redistribute static route-map connected-routes” command will redistribute all static routes without a matching deny in the route map “connected-routes”.

The “redistribute connected” command will redistribute all connected routes for the switch except local loopback addresses.

The “redistribute static route-map connected-routes” command will redistribute all static routes with a matching permit in the route map “connected-routes-

QUESTION 68
What is one advantage of using OCSP vs CRLs for certificate validation?

reduces latency between the time a certificate is revoked and validation reflects this status

less complex to implement

higher availability for certificate validation

supports longer certificate validity periods

QUESTION 69
A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication What should be enabled to ensure the best roaming experience?

802.1X

802. 11r

802.11W

802 .11h

QUESTION 70
Refer to Exhibit:

With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?

Spanning-tree bpdu-guard setting

Spanning-tree instance vlan mapppjng

spanning-tree Cist mapping

Spanning-tree root-guard setting

Explanation
The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
* Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500. These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
* A. Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
* C. Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
* D. Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.

QUESTION 71
By default, Best Effort is higher priority than which priority traffic type?

All queues

Background

Internet Control

Network Control

QUESTION 72
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?

“The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients

When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz

The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.

QUESTION 73
What is the order of operations tor Key Management service for a wireless client roaming from AP1 to AP2?

QUESTION 74
With the CX 6000 48G switch with uplinks of 1/1/47 and 1/1/48, what does the switch do when a client port detects a loop and tx-disable parameter is used?

The ports that confirmed the loop are disabled.

The ports that transmitted and received the loop are disabled.

The port that transmitted the loop is disabled.

The port that received the loop is disabled.

HP HPE7-A01 exam, also known as the Aruba Certified Campus Access Professional (ACCA) exam, is designed to test the knowledge and skills of IT professionals who work with Aruba products and solutions. Aruba Certified Campus Access Professional Exam certification validates a professional’s ability to design, deploy, and support secure and reliable wireless networks using Aruba solutions. HPE7-A01 exam covers topics such as networking fundamentals, wireless LAN design, troubleshooting, and security.

Q&As with Explanations Verified & Correct Answers: https://www.actualpdf.com/HPE7-A01_exam-dumps.html

Leave a Reply Cancel reply