Get Latest Jan-2024 Conduct effective penetration tests using ActualPDF H12-351_V1.0 exam [Q16-Q34]

5/5 - (2 votes)

Get Latest [Jan-2024] Conduct effective penetration tests using ActualPDF H12-351_V1.0

Penetration testers simulate H12-351_V1.0 exam PDF

Huawei H12-351_V1.0 certification exam is intended for IT professionals who have experience working with WLAN networks and are looking to enhance their knowledge and skills in this area. H12-351_V1.0 exam is suitable for WLAN network engineers, WLAN network administrators, and WLAN network managers. H12-351_V1.0 exam is also suitable for those who are looking to gain a better understanding of WLAN networks and how they function.

NO.16 Drag the reasons for AP onboarding failures on the left to the corresponding troubleshooting operations on the right.

NO.17 Master NCE-Campuslnsight can comprehensively record and analyze Interference. Which of the following parameters are recorded? (Select All that Apply)

Recommended channels

Interference fulfillment rate

Interference strength

Number of interference SSIDs

Air interface congestion fulfillment rate

NO.18 With protocol trace, iMaster NCE-Campuslnsight displays protocol-level Interaction details at the phases for wireless users. (Enter the acronyms in capital letters.)

NO.19 Which of the following tools are commonly used for WLAN network planning, acceptance, or health evaluation? (Select All that Apply)

WLAN Planner

iMaster NCE-Campuslnsight

eDesk

CloudCampus APP

NO.20 Which of the following statements about EAP relay and EAP termination are false? (Select All that apply)

In EAP relay mode, an access device extracts information from EAP packets, encapsulates the information into RADIUS packets, and sends the RADIUS packets to an authentication server.

In EAP termination mode, an access device encapsulates EAP packets sent by an 802. IX client Into RADIUS packets, without processing the data in the EAP packets.

In EAP termination mode, an access device extracts client authentication information from the EAP packets sent by a client and encapsulates the information using the standard RADIUS protocol. The access device supports only the EAP MD5-Challenge authentication method.

The EAP termination mode simplifies the processing on an access device and supports various authentication methods. However, this mode requires an authentication server to support EAP and have high processing capability.

NO.21 Which of the following user access authentication modes are supported In Huawel’s CloudCampus Solution?
(Select All that Apply)

802. IX authentication

MAC address authentication

Portal authentication

NO.22 Satellite positioning can achieve high positioning accuracy in both indoor and outdoor scenarios.

True

False

NO.23 The display sync-configuration compare command is executed on the backup WAC in HSB to check wireless configuration synchronization. Based on the command output, which of the following statements are true?
(Select All that apply)

This command is used to check whether the public configurations on two WACs are consistent after wireless configuration synchronization.

The configuration of ssid-profile 2 exists on both the master and backup WACs.

The configuration of vap-profile name 3 exists on the master WAC but not on the backup WAC.

The configuration of vap-profile name 2 exists on the backup WAC but not on the master WAC.

NO.24 Which of the following items is not involved in the HLD phase?

Capacity planning

Network design

AP position planning

Deployment planning

NO.25 Which of the following are typical 802. IX authentication modes? (Select All that apply)

EAP termination

EAP relay

EAP-TLS

EAP-MD5

NO.26 802. 11r fast roaming (over-the-air) is enabled on the WLAN shown in the figure. A STA roams from AP1 to AP2. Sort the steps in chronological order during the 802.11r fast roaming process between WACs.

NO.27 Differentiated network planning needs to be performed to meet requirements of different IoT services in Huawei’s CloudCampus loT solutions. Drag the solutions on the left to their corresponding network planning suggestions on the right.

NO.28 In a dual-link HSB scenario, after an AP sets up CAPWAP links with the active and standby WACs, which of the following types of packets does the AP periodically send to the WACs to detect link status?

Echo

DTLS

Join

Keepalive

NO.29 After multicast-to-unicast conversion is enabled on an AP’s air interface, which of the followings is the destination MAC address of multicast packets sent over the air interface?

Multicast MAC address

MAC address of the multicast source

Broadcast MAC address

MAC address of a STA

NO.30 Which of the following methods are used in IPsec to ensure secure transmission of service data on the network through encryption and authentication?

The receiver verifies the identity of the sender.

The receiver rejects old or duplicate packets in order to prevent attacks initiated by malicious users who resend sniffed packets,

The sender verifies the identity of the receiver.

Data integrity is verified.

NO.31 When calculating the number of APs, you can divide the total required bandwidth by the maximum bandwidth of a single AP.

True

False

NO.32 Which of the following components is not included In a typical RFID system?

Information processing platform

RFID tag

Router

RFID reader

NO.33 Which of the following may be the reason why no data Is displayed on the telemetry management page of IMaster NCE-CampusInsight? (Select All that Apply)

The network connecting devices and iMaster NCE-Campuslnsight Is faulty.

Telemetry data reporting is not configured on devices according to the configuration guide.

No license file is imported.

Devices are not added to iMaster NCE-Campuslnsight.

The UTC time of devices is inconsistent with that of iMaster NCE-Campuslnsight.

NO.34 WPA3 has the following advantages over WPA and WPA2: supports WPA3-SAE, provides a more secure handshake protocol, enhances the algorithm strength, and supports Suite A cryptography.

True

False

Huawei H12-351_V1.0 is a certification exam that measures the candidate’s knowledge and skills in designing, deploying, and troubleshooting WLAN networks. H12-351_V1.0 exam is designed for IT professionals who are responsible for WLAN network planning, design, and integration. Passing H12-351_V1.0 exam will validate the candidate’s ability to configure and manage enterprise-level WLAN networks and prepare them for the HCIE-WLAN certification.

Tested Material Used To H12-351_V1.0 Test Engine: https://www.actualpdf.com/H12-351_V1.0_exam-dumps.html

Leave a Reply Cancel reply