Dec-2023 Oracle 1z0-1091-22 Actual Questions and Braindumps [Q13-Q34]

Rate this post

Dec-2023 Oracle 1z0-1091-22 Actual Questions and Braindumps

1z0-1091-22 Dumps To Pass Oracle Exam in 24 Hours – ActualPDF

Oracle Utilities Meter Solution is a cloud-based software that enables utilities companies to manage their metering operations more efficiently. This solution helps to streamline the meter-to-cash process, reduce costs, and improve customer satisfaction. Getting certified in the Oracle 1z0-1091-22 exam can help professionals gain a competitive edge in the utilities industry by demonstrating their expertise in implementing and configuring this powerful solution.

Oracle 1z0-1091-22 Exam Syllabus Topics:

Topic	Details
Topic 1	Configure base package usage calculation rules Map Interval Measurements To Time-of-Use Periods Smart Grid Gateway (SGG) SaaS Payload Processing
Topic 2	Configure the Smart Grid Gateway (SGG) SaaS Architecture Configure specifications and their relationship to assets
Topic 3	Describe and implement intial measurements, final measurements, and derrived values Configure Service Points, Devices and Measuring Components and Measurement Cycles
Topic 4	Design and set up the admin data required to effectively configure a usage subscription Service Points, Devices and Measuring Components
Topic 5	Explain key concepts Service Points, Devices and Measuring Components Configure VEE rules and exceptions, including the VEE rules used by the consumption synchronization process
Topic 6	Explain the key concepts of Time-of-Use (TOU) and how it applies to final measurements Explain the main components of Dynamic Aggregations
Topic 7	Implement Best practices for measurement retention Describe the commands generally supported by SGG adapters and the Adapter Development Kit (ADK)
Topic 8	Smart Grid Gateway (SGG) SaaS Overview, Adapters and Integrations Explain the cloud service payload processing configuration

NO.13 Your client requests you to design and set up data necessary to support an electric meter that is installed at a customer’s service point with solar panels:
* Channel 1: Measures the kWh that was consumed from the grid. This is an interval channel that measures in
60-minute intervals.
* Channel 2: Measures the kWh that was generated. This is an interval channel that measures in 60-minute intervals.
Using the Math usage rule, you must create usage transactions that take the difference between the consumed and generated channels, store and name the difference value, and store the derived curve.
Which THREE statements are true?

The two channels need distinct service quantity identifiers (SQIs) to differentiate between the generated and consumed kWh.

Net consumption SQI is required.

You must set “Save Derived Vector” to Yes in the Math usage rule.

Net consumption SQI is not required because the result is stored in the database.

A separate generated service point is required

NO.14 The Vector and Service Quantity Math usage rule facilitates the configuration of complex vector calculations.
It is based on a series of underlying services with vectors configured as input to the calculations.
What are THREE typical uses of the usage rule?

Finding coincident peaks

Finding max values

Performing Array math

Performing math formulas on interval data

Converting interval data to scalar reads

NO.15 Which THREE statements are true about the Subtractive Interval Data functionality?

The IMD load processes calculate consumption in engineering units.

A new reading condition field ensures that you do not lose the reading quality when a meter’s consumption is estimated.

You can optionally validate for rollover exceptions and negative consumption calculations.

It validates consumption in initial measurement data (IMD).

It converts engineering units into reads.

Explanation
The Subtractive Interval Data functionality is a feature that enables Meter Data Management (MDM) to process interval data from devices that do not provide interval readings, but only cumulative readings. The Subtractive Interval Data functionality performs the following actions:
* The IMD load processes calculate consumption in engineering units: The IMD load processes are batch processes that load initial measurement data (IMD) records from smart meter systems or other sources into MDM. The IMD load processes calculate consumption in engineering units by subtracting consecutive cumulative readings and applying conversion factors.
* A new reading condition field ensures that you do not lose the reading quality when a meter’s consumption is estimated: A reading condition field is an attribute that indicates the quality or status of a measurement, such as valid, invalid, estimated, or substituted. A new reading condition field called Original Reading Condition is added to store the original reading condition of a cumulative reading when its consumption is estimated by using VEE rules.
* You can optionally validate for rollover exceptions and negative consumption calculations: You can configure VEE rules to check for rollover exceptions and negative consumption calculations when processing subtractive interval data. A rollover exception occurs when a cumulative reading reaches its maximum value and resets to zero. A negative consumption calculation occurs when a cumulative reading decreases instead of increasing.
It is not true that it validates consumption in initial measurement data (IMD), which are records that store the raw measurement data that is received from smart meter systems or other sources. Subtractive Interval Data functionality does not validate consumption in IMD, but calculates consumption from cumulative readings.
It is not true that it converts engineering units into reads, which are values that are recorded by devices at certain intervals or events. Subtractive Interval Data functionality does not convert engineering units into reads, but calculates consumption in engineering units from cumulative readings.

NO.16 A new fast food restaurant is being installed at the center of a university. The restaurant will be metered, but its usage will also be included in the university’s master meter.
What should you do to bill the university correctly?

Configure the restaurant’s service point on the university’s usage subscription to exclude the restaurant’s usage.

Exclude the restaurant’s usage from customer information system (CIS).

Use derivation algorithms to exclude the restaurant’s usage from the master meter.

Set up a virtual meter to exclude the restaurant’s usage from the master meter.

NO.17 From where is the final measurement condition code created?

Post-VEE condition code

Raw condition code

Pre-VEE condition code

Condition code sent from head-end system (HES)

NO.18 Which TWO statements are true about the Measurement Reprocessing functional?

When a meter multiplier changes retroactively, measurements are reprocessed, triggering billing adjustment notifications that are sent to the customer information systems.

When an installation constant changes retroactively for a meter, measurements are automatically reprocessed, triggering billing adjustment notifications that are sent to the customer information systems.

Measurement reprocessing is executed by users manually, which imports corrected initial measurement data (IMD) records.

Derived measurements are recalculated based on new data.

NO.19 A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and they plan to replace their legacy scalar time-of-use (TOU) meters with smart meters. They want customer information system (CIS) to continue to bill for the same TOU periods and they do not want to change the CIS rates.
In which THREE ways can you configure Meter Data Management (MDM) to support this requirement?

Write a custom algorithm to determine the proper rate.

Add an extendable lookup value containing the new device configuration type and the new usage calculation group.

Add the TOU mapping rule to the existing usage calculation group.

Add a new usage calculation group with a TOU mapping rule.

Set up the new usage calculation group to be identified dynamically by plug-in logic supplied on the usage subscription’s type.

NO.20 Which THREE are derived values?

Value with a factor such as line loss applied.

Value converted from one unit of measurement to another.

Estimated value if the final measurement is too low or high.

Interval data values created by “intervalizing” a scalar reading by applying a profile to it.

Comparison of normal versus actual usage.

NO.21 Oracle Utilities Meter Data Management (MDM) DataConnect facilitates extraction of data for use in external applications such as energy management systems.
Which TWO can you export in the MDM version of DataConnect?

Billing determinants

Service points and install events

Usage measurement data

Configuration data

Device events

NO.22 If a project is setting up meter commands with a head-end system (HES), which TWO components should you configure to support the inbound responses from HES?

Inbound web services

Outbound message type

Master configurations

Message sender

NO.23 For a Meter Data Management (MDM) implementation, a customer requires specific bill determinants along with bill determinant calculation validations to be executed, before the determinant values are exported to their customer information system (CIS).
Which THREE factors should you consider while configuring usage calculation groups?

CIS rates, that MDM bill determinants or the usage process are expected to support

Bill determinants or usage validations

Bill determinants or usage calculations

Type of measurement (interval or scalar) data that needs to be used for bill determinants or usage calculation

Device subscriptions

NO.24 Assets and components can have specifications associated with them to describe design details and asset attributes.
Which THREE are correct Smart Meter specifications?

Asset disposition

Firmware

Asset age

Asset type

Manufacturer

NO.25 Which relationship must be established with an external system or a service provider before creating bill determinants in Meter Data Management (MDM)?

Usage factor

Usage transaction

Usage subscription

Usage rule

NO.26 Which THREE features should you set up in the Cloud Service Payload Processing configuration?

File system directory SFTP setup

Key rings and key pairs

Object Storage locations

Head-end systems (HES)

NO.27 Your client wants to generate bill determinants for the billing system by using a time-of-use (TOU) group for
“on peak”, “off peak”, and “shoulder.” They also want to have holiday consumption categorized as “off peak” regardless of the day on which it falls.
What is the correct configuration for this?

Edit the TOU map template to include the Holiday TOU as “off peak”.

Add the work calendar to the TOU map template and set the Holiday TOU as “off peak”.

Add the work calendar to the TOU map template and set the Holiday TOU as “on peak”, “off peak”, or
“shoulder” depending on the calendar day.

Add the work calendar to the TOU map template and set the Holiday TOU as “on peak”.

Add the work calendar ta the TOU map template.

NO.28 When used with the SaaS Cloud services, the Oracle Smart Grid Gateway (SGG) adapters process usage and device event payloads via batch processing. Files are sent from a head-end system (HES) to an Oracle Cloud Object Storage location, where they are batch processed.
Which THREE operations are performed by the SGG processes?

Parse payload into individual usage readings/device events.

Invoke IMD/Device Event Seeder (as appropriate).

Transform usage readings into standard (unified) format.

Load reads into Object Storage.

Load reads into a file directory.

NO.29 Which step should you perform to configure commands in a SaaS environment?

Create Object Storage locations (or buckets).

Configure File Storage Configuration (Fl-RleStorage) extendable lookup.

Configure the following processing methods: Unit of Measure (UOM) Translation, Initial Measurement Creation, and Device Event Mapping.

Create key rings and key pairs.

Configure outbound and inbound communications (Request/Response model).

NO.30 The interval proxy day estimation Validation, Estimation, and Editing (VEE) rule estimates missing intervals by selecting interval data to average from a list of days that are most like the day being estimated. This is achieved by measuring the component comparison periods.
What is used to define the proxy?

Like premise

Weather data

Neighbor

Customer class profile

NO.31 Which TWO Validation, Estimation, and Editing (VEE) rules are typically configured on a project for consumption synchronization processes?

Interval adjustment from scalar: Adjust the interval curve to the register consumption.

Low check: Check for invalid low usage.

Sum check: Ensure the two measuring components are in sync.

Unit of Measure (UOM) check: Ensure UOMs are correct.

NO.32 In the SaaS solution, how should you configure equipment that attaches to an asset, such as a communication module attached to a meter?

Set up a component

Create a master child asset

Add a sub-asset

Add a constituent part

NO.33 Different validation, estimation, and editing (VEE) rules can be applied based on the VEE roles that categorize the source of the measurement data.
Which THREE VEE roles are provided as part of the base product?

Manual override

Initial load

Retry

Customer provided

Estimation

Oracle 1z0-1091-22 certification exam is designed to test the candidate’s knowledge of the Oracle Utilities Meter Solution Cloud Service 2022, including its architecture, installation, configuration, and customization. 1z0-1091-22 exam consists of 60 multiple-choice questions that must be completed within 105 minutes. Candidates must score at least 65% to pass the exam and obtain the Oracle Utilities Meter Solution Cloud Service 2022 Implementation Professional certification.

Download the Latest 1z0-1091-22 Dump – 2023 1z0-1091-22 Exam Question Bank: https://www.actualpdf.com/1z0-1091-22_exam-dumps.html