[UPDATED 2026] 201 dumps Free Test Engine Verified By Certified Experts [Q56-Q80]

4.5/5 - (2 votes)

[UPDATED 2026] 201 dumps Free Test Engine Verified By Certified Experts

Realistic 201 Accurate & Verified Answers As Experienced in the Actual Test!

F5 201 (BIG-IP Administrator) Exam is a certification test that evaluates the skills and knowledge required to manage and configure F5 BIG-IP solutions. 201 exam is designed for professionals with experience in BIG-IP administration and covers a wide range of topics related to network and application delivery fundamentals. Candidates can prepare for the exam by using study materials and are recommended to have at least two years of experience in BIG-IP management.

F5 201 (BIG-IP Administrator) Certification Exam is an essential certification for IT professionals who want to advance their career in the networking and security industry. BIG-IP Administrator Exam certification exam validates the skills and knowledge required to design, configure, and manage F5 BIG-IP products in complex network environments. IT professionals who hold this certification are highly sought after by employers and can command higher salaries.

Q56. A BIG-IP Administrator makes a configuration change to the BIG-IP device. Which file logs the message regarding the configuration change?

/var/log/messages

/var/log/audit

/var/log/user.log

/var/log/secure

Q57. For a given Virtual Server, the BIG-IP must perform SSL Offload and negotiate secure communication overTLSvl.2only.
What should the BIG-IP Administrator do to meet this requirement?

Configure a custom SSL Profile (Client) and select no TLSvl in the options list

Configure a custom SSL Profile (Client) with a custom TLSV1.2 cipher string

Configure a custom SSL Profile (Server) and select no TLSvl in the options list

Configure a custom SSL Profile (Server) with a custom TLSV1.2 cipher string

Q58. How should a BIG-IP Administrator control the amount of traffic that a newly enabled pool member receives.

set the Slow Ramp Time

set a Connection Limit

set the Priority Group Activation

set a Health Monitor

Q59. A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?

Least Connections (member)

Least Connections (node)

Predictive (member)

Predictive (node)

Q60. A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed delivery. What should the BIG-IP Administrator configure?

syslog-ng

Request Logging Profile

HSL Logging

Remote Logging

Q61. Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server’s destination port were not 443.

SSL termination could not be performed if the virtual server’s port was not port
443.

Virtual
servers
with a
ClientSSL
profile
are
always
configured
with a destination port of 443.

As long as client traffic was directed to
the alternate port, the virtual server would work as intended.

Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.

Q62. A site has assigned the ICMP
monitor to all nodes and a custom monitor, based on the HTTP template,
to a pool of web
servers. The HTTPElbased monitor
is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member. 5 nodes. All other settings are default. What is the status of the pool members.

All pool members are up since the HTTPElbased monitor is successful.

All pool members are down since the ICMPElbased monitor is failing in some cases.

The pool members whose nodes are failing the ICMPElbased monitor will be marked disabled.

The pool members whose nodes are failing the ICMPElbased monitor will be marked unavailable.

Q63. A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

TCP

HTTP

HTTPS

ClientSSL

ServerSSL

Q64. When using the setup utility to configure a redundant pair, you are asked to provide a “Failover Peer IP”. Which address is this.

an address of the other system in its management network

an address of the other system in a redundant pair configuration

an address on the current system used to listen for failElover messages from the partner BIGIP

an address on the current
system used to
initiate mirroring
and network failElover heartbeat messages

Q65. Administrative user accounts have been defined on the remote LDAP server and are unable to log in to the BIG-IP device.
Which log file should the BIG-IP Administrator check to find the related messages?

/var/log/secure

/var/log/messages

/Nar/log/ltm

/var/log/user.log

Q66. Which three statements describe a characteristic of profiles? (Choose three.)

Default profiles cannot be created or deleted.

Custom profiles are always based on a parent profile.

A profile can be a child of one profile and a parent of another.

All changes to parent profiles are propagated to their child profiles.

While most virtual servers have at least one profile associated with them, it is not required.

Q67. A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?

Availability Requirement

Allow SNAT

Action On Service Down

Slow Ramp Time

Q68. Which statement is true concerning SNATs using automap?

Only specified self-IP addresses are used as automap addresses.

SNATs using automap will translate all client addresses to an automap address.

A SNAT using automap will preferentially use a floating self-IP over a nonfloating self-IP.

A SNAT using automap can be used to translate the source address of all outgoing traffic to the same address regardless of which VLAN the traffic is sent through.

Q69. Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

The SNAT must be enabled for all VLANs.

The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.

The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.

The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.

Q70. Refer to the exhibit.

A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.
Which actional configuration is regard to resolve this issue?

Configure SSL Profile (Client)

Configure Protocol Profile (Server)

Configure Service Profile HTTP

Configure SSL Profile (Server)

Q71. A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?

Availability Requirement

Allow SNAT

Action On Service Down

Slow Ramp Time

Q72. A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on a Trunk is DOWN.
What is the reason for this Interface status?

The switch is NOT connected to the Interface

There is NO transceiver installed on the Interface

There is NO default route configured for this trunk

The media speed of the interface has NOT been set

Q73. The 8IG-IP Administrator generates a qkview using “qkview -SO” and needs to transfer the output file via SCP.
Which directory contains the output file?

/var/log

/var/tmp

/var/local

/var/config

Q74. Assuming there are open connections through an active system’s virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.

All open connections are lost.

All open connections are maintained.

When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.

LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost.

All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.

Q75. The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool eb.is marked vailable.
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool .eb.is marked .vailable (green) which situation is sufficient to cause this.

All of the eb.pool member
nodes are responding to the
ICMP monitor
as expected.All of the .eb.pool. member. nodes are responding to the ICMP monitor as expected.

Less than 50% of the eb.pool member nodes responded to the ICMP echo request.Less than 50% of the .eb.pool. member. nodes responded to the ICMP echo request.

All of the members of the eb.pool have had their content updated recently and their responses no longer match the monitor receiveAll of the members of the .eb.pool have had their content updated recently and their responses no longer match the monitor. receive rule.

Over 25% of the eb.pool members have had their content updated and it no longer matches the receive rule of the custom monitor.Over 25% of the
.eb.pool. members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.The other. respond as expected.

Q76. Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

Most templates, such as http and tcp, are as effective as customized monitors.

Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.

Most templates, such as https, should have the receive rule customized to make the monitor more robust.

While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.

Q77. Which two can be a part of a pool’s definition. (Choose two.)

rule(s)

profile(s)

monitor(s)

persistence type

loadElbalancing mode

Q78. What is the purpose of provisioning.

Provisioning allows modules that are not licensed to be fully tested.

Provisioning allows modules that are licensed be granted appropriate resource levels.

Provisioning allows the administrator to activate
modules
in nonElstandard combinations.

Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.

Q79. A virtual server is listening at 10.10.1.100:80 and has the following
iRule associated with it: when HTTP_REQUEST { if { [HTTP::header UserElAgent] contains “MSIE” } { pool MSIE_pool } else { pool Mozilla_pool } If a user connects to http://10.10.1.100/foo.html and their browser does not specify a UserElAgent, which pool will receive the request.

MSIE_pool

Mozilla_pool

None. The request will be dropped.

Unknown. The pool cannot be determined from the information provided.

Q80. Refer to the exhibit.

During maintenance, the BIG-IP Administrator manually disables a pool member as shown.
What is the result?