100% Free Real Updated 300-730 Questions & Answers Pass Your Exam Easily [Q42-Q58]

5/5 - (2 votes)

100% Free Real Updated 300-730 Questions & Answers Pass Your Exam Easily

Easily To Pass New 300-730 Verified & Correct Answers

Q42. Refer to the exhibit.

Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?

address-pool

group-alias

group-policy

tunnel-group

Q43.

Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host “ikev2” is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?

The HostName is incorrect.

The IP address is incorrect.

Primary protocol should be SSL.

UserGroup must match connection profile.

Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891

Q44. Which redundancy protocol must be implemented for IPsec stateless failover to work?

SSO

GLBP

HSRP

VRRP

https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/17826- ipsec-feat.html

Q45. Which technology works with IPsec stateful failover?

GLBR

HSRP

GRE

VRRP

Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512

Q46. Refer to the exhibit. An engineer is troubleshooting a new GRE over IPsec tunnel.
The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2.
Which type of traffic is being blocked?

ESP packets from spoke2 to spoke1

ISAKMP packets from spoke2 to spoke1

ESP packets from spoke1 to spoke2

ISAKMP packets from spoke1 to spoke2

Q47. Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?

show crypto ikev2 sa

show crypto isakmp sa

show crypto gkm

show crypto identity

Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116413-configure-flexvpn-00.pdf

Q48. Which parameter must match on all routers in a DMVPN Phase 3 cloud?

GRE tunnel key

NHRP network ID

tunnel VRF

EIGRP split-horizon setting

NHRP network IDs are locally significant and can be different. It makes sense from a deployment and maintenance perspective to use unique network ID numbers (using the ip nhrp network-id command) across all routers in a DMVPN network, but it is not necessary that they be the same. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html

Q49. Refer to the exhibit. Which type of VPN is used in the configuration?

GETVPN

FlexVPN

DMVPN

IPSec

Q50.

Refer to the exhibit. Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)

group-url https://172.16.31.10/General enable

group-policy General internal

authentication aaa

authentication certificate

group-alias General enable

Section: Remote access VPNs

Q51. Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)

When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.

The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.

A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.

When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.

Clientless SSLVPN provides Layer 3 connectivity into the secured network.

Section: Remote access VPNs

Q52. Refer to the exhibit.

Which type of VPN is used?

GETVPN

clientless SSL VPN

Cisco Easy VPN

Cisco AnyConnect SSL VPN

Q53. Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?

The XML profile is not configured correctly for the affected users.

The new client image does not use the same major release as the current one.

Client services are not enabled.

Client software updates are not supported with IKEv2.

Q54. Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.

Q55. Refer to the exhibit.

Which VPN technology is used in the exhibit?

DVTI

VTI

DMVPN

GRE

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnips/configuration/zZ-Archive/ IPsec_Virtual_Tunnel_Interface.html#GUID-EB8C433B-2394-42B9-997F-B40803E58A91

Q56. Which parameter is initially used to elect the primary key server from a group of key servers?

code version

highest IP address

highest-priority value

lowest IP address

Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/ deployment_guide_c07_554713.html

Q57. In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed?
(Choose two.)

Define the RADIUS server.

Verify that clients are using the correct authorization policy.

Define the AAA server.

Assign the list to an authorization policy.

Set the maximum segment size.

Q58. On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?

interface virtual-access

ip nhrp redirect

interface tunnel

interface virtual-template

On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, the command that is needed for the hub to be able to terminate FlexVPN tunnels is interface virtual-template. The interface virtual-template command is used to configure a virtual template interface which provides a secure tunnel for FlexVPN connections. The other commands listed – interface virtual-access, ip nhrp redirect, and interface tunnel – are not related to FlexVPN and are not used to terminate FlexVPN tunnels.

Loading …

Cisco 300-730 certification exam is intended for network security professionals who have experience in implementing VPN solutions. 300-730 exam is a requirement for those who wish to become a Cisco Certified Specialist – Security VPN Implementation. Implementing Secure Solutions with Virtual Private Networks certification validates the individual’s knowledge and expertise in implementing secure VPN solutions using Cisco technologies.

Free 300-730 Exam Files Downloaded Instantly: https://www.actualpdf.com/300-730_exam-dumps.html

Leave a Reply Cancel reply