2023 Realistic Associate-Cloud-Engineer Dumps are Available for Instant Access [Q131-Q147]

Rate this post

2023 Realistic Associate-Cloud-Engineer Dumps are Available for Instant Access

Download Exam Associate-Cloud-Engineer Practice Test Questions with 100% Verified Answers

Google Associate-Cloud-Engineer Exam is an excellent opportunity for professionals who want to advance their cloud computing careers and become experts in GCP. Google Associate Cloud Engineer Exam certification is recognized by industry leaders and provides a competitive advantage in the job market. With the right preparation and training, passing the exam can be a great achievement that opens up new career opportunities.

Google Associate Cloud Engineer Certification Exam is a valuable certification that validates the skills and knowledge of individuals in designing, developing, and managing cloud solutions on the Google Cloud Platform. Google Associate Cloud Engineer Exam certification is designed to help professionals who want to kickstart their career in cloud computing and gain expertise in Google Cloud Platform. Associate-Cloud-Engineer exam tests the candidates on their knowledge of Google Cloud Platform services, infrastructure, security, and management.

NEW QUESTION 131
You have downloaded and installed the gcloud command line interface (CLI) and have authenticated with your Google Account. Most of your Compute Engine instances in your project run in the europe-west1-d zone.
You want to avoid having to specify this zone with each CLI command when managing these instances. What should you do?

Set the europe-west1-d zone as the default zone using the gcloud config subcommand.

In the Settings page for Compute Engine under Default location, set the zone to europe-west1-d.

In the CLI installation directory, create a file called default.conf containing zone=europe-west1-d.

Create a Metadata entry on the Compute Engine page with key compute/zone and value europe-west1-d.

NEW QUESTION 132
You are deploying an application to App Engine. You want the number of instances to scale based on request rate. You need at least 3 unoccupied instances at all times. Which scaling type should you use?

Manual Scaling with 3 instances.

Basic Scaling with min_instances set to 3.

Basic Scaling with max_instances set to 3.

Automatic Scaling with min_idle_instances set to 3.

NEW QUESTION 133
You have 32 GB of data in a single file that you need to upload to a Nearline Storage bucket. The WAN connection you are using is rated at 1 Gbps, and you are the only one on the connection. You want to use as much of the rated 1 Gbps as possible to transfer the file rapidly. How should you upload the file?

Use the GCP Console to transfer the file instead of gsutil.

Enable parallel composite uploads using gsutil on the file transfer.

Decrease the TCP window size on the machine initiating the transfer.

Change the storage class of the bucket from Nearline to Multi-Regional.

NEW QUESTION 134
You are building a new version of an application hosted in an App Engine environment. You want to test the new version with 1% of users before you completely switch your application over to the new version. What should you do?

Deploy a new version of your application in Google Kubernetes Engine instead of App Engine and then use GCP Console to split traffic.

Deploy a new version of your application in a Compute Engine instance instead of App Engine and then use GCP Console to split traffic.

Deploy a new version as a separate app in App Engine. Then configure App Engine using GCP Console to split traffic between the two apps.

Deploy a new version of your application in App Engine. Then go to App Engine settings in GCP Console and split traffic between the current version and newly deployed versions accordingly.

NEW QUESTION 135
You need to grant access for three users so that they can view and edit table data on a Cloud Spanner instance. What should you do?

Run gcloud iam roles describe roles/spanner.databaseUser. Add the users to the role.

Run gcloud iam roles describe roles/spanner.databaseUser. Add the users to a new group. Add the group to the role.

Run gcloud iam roles describe roles/spanner.viewer –project my-project. Add the users to the role.

Run gcloud iam roles describe roles/spanner.viewer –project my-project. Add the users to a new group. Add the group to the role.

NEW QUESTION 136
You are deploying an application to a Compute Engine VM in a managed instance group. The application must be running at all times, but only a single instance of the VM should run per GCP project. How should you configure the instance group?

Set autoscaling to On, set the minimum number of instances to 1, and then set the maximum number of instances to 1.

Set autoscaling to Off, set the minimum number of instances to 1, and then set the maximum number of instances to 1.

Set autoscaling to On, set the minimum number of instances to 1, and then set the maximum number of instances to 2.

Set autoscaling to Off, set the minimum number of instances to 1, and then set the maximum number of instances to 2.

NEW QUESTION 137
A team of data scientists infrequently needs to use a Google Kubernetes Engine (GKE) cluster that you manage. They require GPUs for some long-running, non-restartable jobs. You want to minimize cost. What should you do?

Enable node auto-provisioning on the GKE cluster.

Create a VerticalPodAutscaler for those workloads.

Create a node pool with preemptible VMs and GPUs attached to those VMs.

Create a node pool of instances with GPUs, and enable autoscaling on this node pool with a minimum size of 1.

NEW QUESTION 138
You have a managed instance group comprised of preemptible VM’s. All of the VM’s keepdeleting and recreating themselves every minute. What is a possible cause of thisbehavior?

Your zonal capacity is limited, causing all preemptible VM’s to be shutdown torecover capacity. Try deploying your group to another zone.

You have hit your instance quota for the region.

Your managed instance group’s VM’s are toggled to only last 1 minute inpreemptible settings.

Your managed instance group’s health check is repeatedly failing, either to amisconfigured health check or misconfigured firewall rules not allowing the healthcheck to access the instance

NEW QUESTION 139
You want to configure autohealing for network load balancing for a group of Compute Engine instances that run in multiple zones, using the fewest possible steps. You need to configure re- creation of VMs if they are unresponsive after 3 attempts of 10 seconds each. What should you do?

Create an HTTP load balancer with a backend configuration that references an existing instance group.
Set the health check to healthy (HTTP)

Create an HTTP load balancer with a backend configuration that references an existing instance group.
Define a balancing mode and set the maximum RPS to 10.

Create a managed instance group. Set the Autohealing health check to healthy (HTTP)

Create a managed instance group. Verify that the autoscaling setting is on.

NEW QUESTION 140
You need to set up permissions for a set of Compute Engine instances to enable them to write data into a particular Cloud Storage bucket. You want to follow Google-recommended practices.
What should you do?

Create a service account with an access scope.
Use the access scope `https://www.googleapis.com/ auth/devstorage.write_only’.

Create a service account with an access scope.
Use the access scope `https://www.googleapis.com/ auth/cloud-platform’.

Create a service account and add it to the IAM role `storage.objectCreator’ for that bucket.

Create a service account and add it to the IAM role `storage.objectAdmin’ for that bucket.

NEW QUESTION 141
You are working for a hospital that stores Its medical images in an on-premises data room. The hospital wants to use Cloud Storage for archival storage of these images. The hospital wants an automated process to upload any new medical images to Cloud Storage. You need to design and implement a solution. What should you do?

Deploy a Dataflow job from the batch template “Datastore lo Cloud Storage” Schedule the batch job on the desired interval

In the Cloud Console, go to Cloud Storage Upload the relevant images to the appropriate bucket

Create a script that uses the gsutil command line interface to synchronize the on- premises storage with Cloud Storage Schedule the script as a cron job

Create a Pub/Sub topic, and enable a Cloud Storage trigger for the Pub/Sub topic. Create an application that sends all medical images to the Pub/Sub lope

NEW QUESTION 142
You have deployed an application on a single Compute Engine instance. The application writes logs to disk. Users start reporting errors with the application. You want to diagnose the problem. What should you do?

Navigate to Cloud Logging and view the application logs.

Connect to the instance’s serial console and read the application logs.

Configure a Health Check on the instance and set a Low Healthy Threshold value.

Install and configure the Cloud Logging Agent and view the logs from Cloud Logging.

NEW QUESTION 143
You are storing sensitive information in a Cloud Storage bucket. For legal reasons, you need to be able to record all requests that read any of the stored data. You want to make sure you comply with these requirements. What should you do?

Enable the Identity Aware Proxy API on the project.

Scan the bucker using the Data Loss Prevention API.

Allow only a single Service Account access to read the data.

Enable Data Access audit logs for the Cloud Storage API.

NEW QUESTION 144
30. You are running multiple microservices in a Kubernetes Engine cluster. One microservice is rendering images. The microservice responsible for the image rendering requires a large amount of CPU time compared to the memory it requires. The other microservices are workloads that are optimized for n1-standard machine types. You need to optimize your cluster so that all workloads are using resources as efficiently as possible. What should you do?

Assign the pods of the image rendering microservice a higher pod priority than the older microservices

Create a node pool with compute-optimized machine type nodes for the image rendering microservice Use the node pool with general-purpose machine type nodes for the other microservices

Use the node pool with general-purpose machine type nodes for lite mage rendering microservice Create a nodepool with compute-optimized machine type nodes for the other microservices

Configure the required amount of CPU and memory in the resource requests specification of the image rendering microservice deployment Keep the resource requests for the other microservices at the default

NEW QUESTION 145
You received a JSON file that contained a private key of a Service Account in order to get access to several resources in a Google Cloud project. You downloaded and installed the Cloud SDK and want to use this private key for authentication and authorization when performing gcloud commands. What should you do?

Use the command gcloud auth login and point it to the private key

Use the command gcloud auth activate-service-account and point it to the private key

Place the private key file in the installation directory of the Cloud SDK and rename it to
“credentials ison”

Place the private key file in your home directory and rename it to
`’GOOGLE_APPUCATION_CREDENTiALS”.

NEW QUESTION 146
You are building an application that will run in your data center. The application will use Google Cloud Platform (GCP) services like AutoML. You created a service account that has appropriate access to AutoML. You need to enable authentication to the APIs from your on-premises environment. What should you do?

Use service account credentials in your on-premises application.

Use gcloud to create a key file for the service account that has appropriate permissions.

Set up direct interconnect between your data center and Google Cloud Platform to enable authentication for your on-premises applications.

Go to the IAM & admin console, grant a user account permissions similar to the service account permissions, and use this user account for authentication from your data center.

NEW QUESTION 147
You are deploying an application to App Engine. You want the number of instances to scale based on request rate. You need at least 3 unoccupied instances at all times. Which scaling type should you use?

Manual Scaling with 3 instances.

Basic Scaling with min_instances set to 3.

Basic Scaling with max_instances set to 3.

Automatic Scaling with min_idle_instances set to 3.