Juniper JN0-250 Real Exam Questions Guaranteed Updated Dump from ActualPDF [Q15-Q32]

Juniper JN0-250 Real Exam Questions Guaranteed Updated Dump from ActualPDF

Verified Pass JN0-250 Exam in First Attempt Guaranteed

Who can take the Juniper JN0-250 Certification Exam:

Anyone who has some experience in the Juniper Networks product can take this test. The only thing is that they must have some basic knowledge about the Juniper Networks products and technologies. In order to pass this exam, you will need to have a good command of the Mist AI components, as well as their configurations, which you can get with the help of
JN0-250 exam dumps. Advance transmission and switching technologies and network protection tools are also part of it. Individuals holding designations like Systems Engineer or Architect can also sit for this exam.

Essential Exam Objectives

Here’s a summary of the Juniper JN0-250 exam objectives as highlighted in the official study guide:

• WLAN Lifecycle;
• Wi-Fi Standards;
• Mist AI Components;
• General WLAN Concepts;
• WLAN Monitoring.

How to prepare for the Juniper JN0-250 Certification Exam

Best prepare guide for the Juniper JN0-250 Certification Exam

Tips to survive, if you do not have time to read all the pages of the syllabus

The JN0-250 certification exam for the Juniper Networks Associate examines your knowledge of the Juniper Networks Mist AI. This knowledge enables you to install and configure Juniper networks. In this article, we describe the JN0-250 certification exam in detail. We’ll explain what you need to know for this certification, including test specifications, certification content, and how to prepare for the certification exam. JN0-250 exam dumps are provided to help you prepare for the JN0-250 exam. Here we will also inform you about the prep resources including this.

Q15. Which site survey ensures that RF design requirements are satisfied?

 passive

 spectrum

 real time

 active

Q16. A microwave oven would be classified as which type of interference?

 Wi-Fi

 rogue

 security

 non Wi-Fi

Q17. Under ideal conditions, which frequency band will have the farthest usable range?

 900 MHz

 2.4 GHz

 5 GHz

 6 GHz

Q18. When would be the earliest opportunity to configure an access point (AP)?

 after you are on the same network as the AP

 after the AP is installed

 after the AP is online

 after the AP is claimed to inventory

Q19. What are two requirements to connect an AP to the Mist Cloud? (Choose two.)

 You need a CA SSL certificate.

 You need DNS resolution.

 You need a static IP address.

 You need a DHCP server

Q20. Referring to the exhibit, what do you determine about the site’s Time to Connect SLE metric?

 Successful connect averaged 1.6 seconds.

 Eighty percent of the Time to Connect failures are related to DHCP failures

 All clients cannot connect to the Internet.

 Time to Connect Association DHCP failures impacted 80% of users.

Q21. What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)

 shorter wavelength

 lower frequency

 less non-Wi-Fi interference

 more congestion

Q22. What happens if your Juniper Mist subscriptions expire?

 Devices are bricked.

 Access to the Ul will be shut off.

 Devices remain operational but cannot make any further configuration changes.

 Devices will be randomly turned off and on.

Q23. What does 802.11ac (Wi-Fi 5) specify as the maximum channel width?

 160 MHz

 60 MHz

 20 MHz

 40 MHz

Reference:
%20configuration%202×2%20and%20above

Q24. Which Juniper Mist device enables seamless roaming for large campus networks through on-premises tunneling?

 Mist BT11

 Mist AP43

 Mist AP33

 Mist Edge

Q25. The DHCP server has run out of address leases on a site.
In this scenario, which SLE would be useful to what is happening?

 capacity

 throughput

 roaming

 successful connects

Q26. You have designed a WLAN to satisfy primary coverage, secondary coverage, and capacity requirements.
However, you still do not have enough BLE radios to satisfy your location requirements. You want to fill the gaps with a low cost, BLE-only device.
Which Mist device will satisfy this requirement?

 AP41

 BT11

 AP32

 AP43

Q27. Which organization is responsible for creating the 802.11 standard?

 Wi-Fi Alliance

 Ethernet Technology Consortium

 Institute of Electrical and Electronics Engineers (IEEE)

 International Organization for Standardization (ISO)

Q28. Which statement is correct about a WLAN RF medium?

 A WLAN RF is a full duplex, contention free medium where each client transmits on a separate channel.

 A WLAN RF is a full-duplex, contention-free medium where 802.11 stations can transmit and receive at the same time.

 A WLAN RF is a half-duplex, shared medium where 802.11 stations contend with each other for access.

 A WLAN RF is a half-duplex, contention-free medium where the access point polls each station in turn.

Q29. What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)

 shorter wavelength

 lower frequency

 less non-Wi-Fi interference

 more congestion

Q30. Which Mist device is designed exclusively for Bluetooth Low Energy?

 AP63

 BT11

 AP43

 AP12

Q31. Mist Radio Resource Management makes dynamic changes to which resource?

 RF template

 channel width

 channel

 BLE channel

Q32. Which two statements about the Mist UI are true? (Choose two.)

 It can initiate a wireless packet capture.

 It can initiate a wired packet capture.

 It can initiate a BLE packet capture.

 It can initiate a packet capture on cloud uplink.

 Loading …

Download Real Juniper JN0-250 Exam Dumps Test Engine Exam Questions: https://www.actualpdf.com/JN0-250_exam-dumps.html

         

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw youemerge.com