Latest Dec-2022 CompTIA PD1-001 Dumps Updated 861 Questions [Q76-Q90]

4.5/5 - (2 votes)

Latest Dec-2022 CompTIA PD1-001 Dumps Updated 861 Questions

PDF Download Free of PD1-001 Valid Practice Test Questions

NO.76 Which of the following is a type of removable memory card?

SCSI

Molex

Hard drive

Compact Flash

NO.77 A client is printing a document they have received from one of their vendors on a LAN printing device. The document prints in landscape even though the printer is hard set to portrait mode and other documents print portrait. Which of the following could be the problem?

The print queue is set to landscape as default.

The page setup associated with the document in the application is set to landscape.

The print driver on their system is defaulting to landscape mode for that particular application.

The printers local defaults are set to landscape mode.

NO.78 When using a multimeter to check for continuity, which of the following settings should the multimeter be set to?

Ohms

AC Volts

DC Volts

Amps

NO.79 Which of the following failed components would be responsible for the photoconductor not properly discharging?

Photoconductor drive motor

Photoconductor grounding plate

Developer unit

Charge roll

NO.80 The client reports they cannot fax to one particular location. Al other locations work fine. The activity report confirms this. Which of the following is the next BEST step?

Try sending to it again this time with several pages.

Use a telephone to call the number in question and listen to the line.

Reboot the fax machine and then try again.

Insert the paper in the ADF face up to ensure the image is captured.

NO.81 While speaking with technical support, a technician is unsure of how to implement the recommended solution. Which of the following is the next BEST step?

Install the parts currently available to the technician.

Look for more information in the service manual.

Search online for service bul etins.

Ask technical support to clarify the solution.

NO.82 Which of the following processes involves removing all residual charges from the photoconductor?

Charge

Exposure

Cleaning

Preparation

NO.83 A device reports jams each time it attempts to print, regardless of the paper source. To resolve the problem, the technician should:

replace the fuser.

inspect the pick-up rollers.

clean the registration assembly.

identify the area where the problem occurs.

NO.84 When a customer is scanning from their multifunction device, using the automatic document feeder, a black line appears on the media output. When the customer scans from the exposure glass, there is no black line on the media output. Which of the following is the MOST likely cause of the black line?

Contamination on the laser mirror

Contamination on the lens unit

Dirty sensors in the scan feed unit

Contamination on the slit glass

NO.85 Which of the following troubleshooting steps would aid in dealing with an issue that might be faced repeatedly in the future with another device?

Isolate the problem

Document results

Validate the solution

Use service documentation

NO.86 Which of the following are needed to connect a device to a wireless network? (Select TWO).

URL

DNS address

SSID

Encryption type

IPID

NO.87 Which of the following items allows rotation of a component in a single direction only?

One way bearing

Unidirectional cam

Bushing

Tension spring

NO.88 A technician has been called to a device giving poor copy quality issues. The technician tests the machine but is unable to recreate the issue. Which of the following should the technician do next?

Replace all the consumables and see if the issue occurs again.

Replace the photoconductor as this part often causes poor quality copies.

Speak with the customer to see if the issue was caused by a specific original.

Call technical support for further advice or suggestions.

NO.89 Toner cartridges should always be disposed of following manufacturers guidelines because toner:

is toxic and can cause serious burns on skin.

is non-biodegradable and has specific disposal guidelines.

emits toxic gases which will harm users.

can cause magnetic interference in other electrical devices.

NO.90 A customers system includes the optional large capacity media source. The configuration page includes the media source trays, but the customers printer driver shows only the standard trays for the system. To fix this problem the technician should:

clean the optional media source rollers and sensors.

load the optional media source with different types of media.

configure the printer driver for the optional media source.

download and install the latest firmware upgrade.

Loading …