Get Ready to Boost your Prepare for your FCP_FAZ_AN-7.6 Exam with 69 Questions [Q39-Q61]

Q39. (When there are no matching parsers for a device log, what does FortiAnalyzer do? (Choose one answer))

Drops the log

Applies the generic SYSLOG parser

Stores the log but doesn’t normalize it

Archives the log for future analysis

Q40. Exhibit.

What can you conclude about these search results? (Choose two.)

They can be downloaded to a file.

They are sortable by columns and customizable.

They are not available for analysis in FortiView.

They were searched by using text mode.

Q41. (Refer to the exhibit.

Which statement about the displayed event is correct? (Choose one answer))

The security risk was dropped.

The risk source is isolated.

The security risk was blocked.

The security event risk is from an application control log.

Q42. Exhibit.

What does the data point at 12:20 indicate?

The log insert log time is increasing.

FortiAnalyzer is using its cache to avoid dropping logs.

The performance of FortiAnalyzer is below the baseline.

The sqiplugind service is caught up with the logs

Q43. Exhibit.

Based on the partial outputs displayed, which devices can be members of a FotiAnalyzer Fabric?

FortiAnalayzer1 and FortiAnalyzer3

FortiAnalyzer1 and FortiAnalyzer2

FortiAnalyzer2 and FortiAnalyzer3

All devices listed can be members.

Q44. You are tasked with finding logs corresponding to a suspected attack on your network. You need to use an interface where all identified threats within timeframe are listed and organized. You also need to be able to quickly export the information to a PDF file.
Where can you go to accomplish this task?

Log Browse

Log View

Fabric View

FortiView

Q45. You must find a specific security event log in the FortiAnalyzer logs displayed in FortiView, but, so far, you have been uncuccessful.
Which two tasks should you perform to investigate why you are having this issue? (Choose two.)

Open .gz log files in FortiView.

Rebuild the SQL database and check FortiView.

Review the ADOM data policy

Check logs in the Log Browse

Q46. Which statement regarding macros on FortiAnalyzer is true?

Macros are predefined templates for reports and cannot be customized.

Macros are useful in generating excel log files automatically based on the report settings.

Macros are ADOM-specific and each ADOM type have unique macros relevant to that ADOM.

Macros are supported only on the FortiGate ADOMs.

Q47. Exhibit. Which statement about the event displayed is correct?

The risk source is isolated.

The security risk was blocked or dropped.

The security event risk is considered open.

An incident was created from this event.

Q48. What is the main purpose of deploying RAID with FortiAnalyzer?

To provide redundancy of your log data

To store data in chunks across multiple drives

To make an identical copy of log data on two separate physical drives

To back up your logs

Q49. Which two statements about exporting and importing playbacks are true? (Choose two.)

A playbook that was disabled when it was exported mil be disabled when it is imported.

Playbooks can so imported 10 a different FortiAnayzer device, but only if the connectors already exist

You can import a playbook even if there is another one win the same name in the destination

You can export only one playbook at a time.

Q50. Which statement about exporting items in Report Definitions is true?

Templates can be exported.

Template exports contain associated charts and datasets.

Chart exports contain associated datasets.

Datasets can be exported.

Q51. What is the purpose of playbook trigger variables?

To display statistics about the playbook runtime

To use information from the trigger to filter the action in a task

To provide the trigger information to make the playbook start running

To store the start the times of playbooks with On_Schedule triggers

Q52. You are trying to configure a task in the playbook editor to run a report. However, when you try to select the desired playbook, you do to see it listed.
What is the reason?

The report does not have auto-cache and extended log filtering enabled.

The playbook is currently running and will be available after it is finished.

You must create a trigger to run the report first.

The report has no result and must be reconfigured.

Q53. (In a FortiAnalyzer Fabric deployment, which three modules from Fabric members are available for analysis on the supervisor? (Choose three answers))

Playbooks

Indicators

Logs

Events

Reports

Q54. Exhibit. A fortiAnalyzer analyst is customizing a SQL query to use in a report. Which SQL query should the analyst run to get the expected results?

Q55. Exhibit. What can you conclude from this output?

There is not disk quota allocated to quarantining files.

FGT_B is the Security Fabric root.

The allocated disk quote to ADOM1 is 3 GB.

Archive logs are using more space than analytic logs.

Q56. What is the purpose of playbook trigger variables?

To display statistics about the playbook runtime

To use information from the trigger to filter the action in a task

To provide the trigger information to make the playbook start running

To store the start the times of playbooks with On_Schedule triggers

Q57. After generating a report, you notice the information you where expecting to see is not included in it.
However, you confirm that the logs are there.

Check the time frame covered by the report.

Disable auto-cache.

Increase the report utilization quota.

Test the dataset

When a generated report does not contain the expected information even though the logs are confirmed to be present, it typically indicates an issue with the report’s configuration. There are a few common reasons this might happen:
* Option A – Check the Time Frame Covered by the Report:
* Reports are generated based on a specific time frame. If the report’s time frame does not cover the period when the relevant logs were collected, those logs won’t appear in the report output.
Verifying and adjusting the time frame is essential to ensure the report includes all relevant data.
* Conclusion: Correct.
* Option B – Disable Auto-Cache:
* Auto-cache is designed to improve report generation speed by using cached data. Disabling auto- cache would typically only be relevant if the report is pulling outdated data from cache, but it doesn’t directly affect whether specific logs are included in a report.
* Conclusion: Incorrect.
* Option C – Increase the Report Utilization Quota:
* The report utilization quota is related to the resource limits for generating reports. It does not directly influence whether certain data appears in a report. Increasing this quota would help only if there are resource issues preventing the report from completing, not if specific logs are missing from the report.
* Conclusion: Incorrect.
* Option D – Test the Dataset:
* Datasets determine which logs and data fields are pulled into the report. If a dataset is configured incorrectly or does not include the required log fields, it could lead to missing information.
Testing the dataset allows you to verify that it’s correctly configured and pulling the expected data.
* Conclusion: Correct.
Conclusion:
* Correct Answer: A. Check the time frame covered by the report and D. Test the dataset.
* These steps directly address the issues that could lead to missing information in a report when logs are available but not displayed.
References:
FortiAnalyzer 7.4.1 documentation on report generation settings, time frames, and dataset configuration for accurate report results.

Q58. Which statement about the FortiSIEM management extension is correct?

It allows you to manage the entire life cycle of a threat or breach.

It can be installed as a dedicated VM.

Its use of the available disk space is capped at 50%.

It requires a licensed FortiSIEM supervisor.

Q59. Exhibit.

What is the analyst trying to create?

The analyst is trying to create a trigger variable to the used in the playbook.

The analyst is trying to create an output variable to be used in the playbook.

The analyst is trying to create a report in the playbook.

The analyst is trying to create a SOC report in the playbook.

In the exhibit, the playbook configuration shows the analyst working with the “Attach Data” action within a playbook. Here’s a breakdown of key aspects:
* Incident ID: This field is linked to the “Playbook Starter,” which indicates that the playbook will attach data to an existing incident.
* Attachment: The analyst is configuring an attachment by selecting Run_REPORT with a placeholder ID for report_uuid. This suggests that the report’s UUID will dynamically populate as part of the playbook execution.
Analysis of Options:
* Option A – Creating a Trigger Variable:
* A trigger variable would typically be set up in the playbook starter or initiation configuration, not within the “Attach Data” action. The setup here does not indicate a trigger, as it’s focusing on data attachment.
* Conclusion: Incorrect.
* Option B – Creating an Output Variable:
* The field Attachment with a report_uuid placeholder suggests that the analyst is defining an output variable that will store the report data or ID, allowing it to be attached to the incident. This variable can then be referenced or passed within the playbook for further actions or reporting.
* Conclusion: Correct.
* Option C – Creating a Report in the Playbook:
* While Run_REPORT is selected, it appears to be an attachment action rather than a report generation task. The purpose here is to attach an existing or dynamically generated report to an incident, not to create the report itself.
* Conclusion: Incorrect.
* Option D – Creating a SOC Report:
* Similarly, this configuration is focused on attaching data, not specifically generating a SOC report. SOC reports are generally predefined and generated outside the playbook.
* Conclusion: Incorrect.
Conclusion:
* Correct Answer: B. The analyst is trying to create an output variable to be used in the playbook.
* The setup allows the playbook to dynamically assign the report_uuid as an output variable, which can then be used in further actions within the playbook.
References:
FortiAnalyzer 7.4.1 documentation on playbook configurations, output variables, and data attachment functionalities.

Q60. What are event handlers?

Alert notifications

SNMP traps

Threats identified by FortiGuard

Specific matched conditions in the raw logs

Q61. Which statement about automation connectors in FortiAnalyzer is true?

An ADOM with the Fabric type comes with multiple connectors configured.

The local connector becomes available after you configured any external connector.

The local connector becomes available after you connectors are displayed.

The actions available with FortiOS connectors are determined by automation rules configured on FortiGate.